PRODUCT SUPPORT PROGRAM FOR CORRECTING THE FUEL RETURN LINE ROUTING ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS
Usage:
SEBE9090
March 2, 2005
U-67
A-50
D-57
O-57
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE FUEL RETURN LINE ROUTING ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS |
|
| 1250 1274 |
PS41786
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
March 31, 2007PROBLEM
The routing of the 240-8598 Fuel Return Line to the tank may not be correct on certain 773E and 775E Off-Highway Trucks. The service life of the line may be shortened if it is too close to the exhaust manifold.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 773E | BDA686-701 |
| 775E | BEC448-452 |
PARTS NEEDED
Show/hide table
|
|
|
|
| 1 | 1L5081 | SPACER |
| 1 | 9M8406 | CLIP |
| 1 | 8T2502 | BOLT |
| 1 | 1488378 | ELBOW AS-90 |
ACTION REQUIRED
Unclip the 240-8598 Hose from the exhaust manifold flange.
Clip it to the top of the flywheel housing using 148-8378 Elbow As, 1L-5081 Spacer, 8T-2502 Bolt, and 9M-8406 Clip.
SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
0-Up Months |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR CONVERTING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS TO FIXED ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR CONVERTING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS TO FIXED ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A RELAY IN THE THE HYDRAULIC LOCKOUT CONTROL CIRCUIT ON CERTAIN TK711 AND TK721 TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A RELAY IN THE THE HYDRAULIC LOCKOUT CONTROL CIRCUIT ON CERTAIN TK711 AND TK721 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 6G-1633 CHAINS THAT MAY CONTAIN SOFT BUSHINGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 6G-1633 CHAINS THAT MAY CONTAIN SOFT BUSHINGS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING AIR INLET HOSE ON CERTAIN 416D AND 424D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING AIR INLET HOSE ON CERTAIN 416D AND 424D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED ALTERNATOR GUARD ON CERTAIN 12H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED ALTERNATOR GUARD ON CERTAIN 12H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE (BRAKE CHARGING) ON CERTAIN 924G AND 928G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE (BRAKE CHARGING) ON CERTAIN 924G AND 928G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH FLOW WORK TOOL TUBES ON CERTAIN 268B SKID STEER LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH FLOW WORK TOOL TUBES ON CERTAIN 268B SKID STEER LOADERS
PRODUCT IMPROVEMENT PROGRAM INSTALLING A BOLT AND A SPACER TO A FUEL LINE ROUTING ON CERTAIN 12H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM INSTALLING A BOLT AND A SPACER TO A FUEL LINE ROUTING ON CERTAIN 12H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CHECK VALVE IN THE TRACTION CONTROL SYSTEM (TCS) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CHECK VALVE IN THE TRACTION CONTROL SYSTEM (TCS) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE COUNTERWEIGHT ON CERTAIN 252B, 262B, AND 268B SKID STEER LOADERS 287B MULTI-TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE COUNTERWEIGHT ON CERTAIN 252B, 262B, AND 268B SKID STEER LOADERS 287B MULTI-TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 836G LANDFILL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 836G LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JOYSTICK CONTROLS DECAL ON CERTAIN 216B, 226B, 232B, 236B 242B, 246B, 248B, 252B, 262B, AND 268B SKID STEER LOADERS AND 247B, 257B, 267B, 277B, AND 287B MULTI TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE JOYSTICK CONTROLS DECAL ON CERTAIN 216B, 226B, 232B, 236B 242B, 246B, 248B, 252B, 262B, AND 268B SKID STEER LOADERS AND 247B, 257B, 267B, 277B, AND 287B MULTI TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE A-PIN ASSEMBLY WHICH MAY LOSE THE RETAINING RING ON CERTAIN 232B, 242B, 252B, 262B, 268B SKID STEER LOADERS AND 257B AND 287B MULTI TERRAIN LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE A-PIN ASSEMBLY WHICH MAY LOSE THE RETAINING RING ON CERTAIN 232B, 242B, 252B, 262B, 268B SKID STEER LOADERS AND 257B AND 287B MULTI TERRAIN LOADERS