PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 6G-1633 CHAINS THAT MAY CONTAIN SOFT BUSHINGS FROM DEALER PARTS STOCK
Usage:
SEBE9092
March 4, 2005
U-69
A-52
D-59
O-59
Show/hide table
| Parts stock action only |
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 6G-1633 CHAINS THAT MAY CONTAIN SOFT BUSHINGS FROM DEALER PARTS STOCK |
|
| 3261 7750 |
PI70097
|
|
TERMINATION DATE
June 30, 2005PROBLEM
Certain 6G-1633 Chain Groups in dealer parts stock may contain soft bushings. The 6G-1633 Chain Groups that may have soft bushings have a "J5" date code. All 6G-1633 Chain Groups in dealer parts stock need to be inspected for the "J5" date code and removed if present.ACTION REQUIRED
Inspect the date code on all 6G-1633 Chain Groups in dealer parts stock. If the date code is "J5" the chain groups need to be removed from dealer parts stock. Refer to the following Illustration.
The date code is stamped on one side of the chain. Approximately every fifth or sixth link will be stamped.
These chain groups would have been received between late September 2004 and late February 2005.
SERVICE CLAIM ALLOWANCES
Submit one claim for all 6G-1633 Chain Groups removed from parts stock.PARTS DISPOSITION
Return all 6G-1633 Chain Groups that are removed from parts stock and a copy of the claim to:
Attn: Jim Breitbarth PI70097
Service Claims Room
8201 N. University
Peoria, IL 61615
Handle the parts in accordance with your Warranty
Bulletin on warranty parts handling.
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE FUEL RETURN LINE ROUTING ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR CORRECTING THE FUEL RETURN LINE ROUTING ON CERTAIN 773E AND 775E OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 826G AND 826G SERIES II LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING CYLINDER ON CERTAIN 416C AND 416D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR CONVERTING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS TO FIXED ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR CONVERTING THE 212-1299, 234-9518, 213-6822, 213-6823, 213-6284 AND 197-3944 SWIVEL ACCESS PLATFORMS TO FIXED ACCESS PLATFORMS ON CERTAIN A AND B SERIES TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR RELOCATING THE AIR INLET RESTRICTION INDICATOR ON CERTAIN TK711, TK721, TK722, TK732, TK741, 1190, 1190T, AND 1290T TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE HOPPER HOSE ASSEMBLY ON CERTAIN AP-1055B ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEER PUMP PLUG ON CERTAIN CB-534D ASPHALT COMPACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW BRACKETS ON THE ARM REST IN ORDER TO PROTECT THE WIRING HARNESS ON CERTAIN 320C, 322C, 322C L, 325C, AND 330C LOG LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CHASSIS ECM ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TANDEM DRIVE CHAINS ON CERTAIN 12H, 140H, 143H, 160H, AND 163H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND/OR REPLACING THE REAR CAB SUPPORT ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW SENSOR, UPDATING SOFTWARE, AND UPDATING THE WATER LINES GROUP ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING AIR INLET HOSE ON CERTAIN 416D AND 424D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING AIR INLET HOSE ON CERTAIN 416D AND 424D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED ALTERNATOR GUARD ON CERTAIN 12H MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING A CRACKED ALTERNATOR GUARD ON CERTAIN 12H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 249-6480 PRODUCT LINK KITS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE (BRAKE CHARGING) ON CERTAIN 924G AND 928G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID VALVE (BRAKE CHARGING) ON CERTAIN 924G AND 928G WHEEL LOADERS AND IT28G INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH FLOW WORK TOOL TUBES ON CERTAIN 268B SKID STEER LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH FLOW WORK TOOL TUBES ON CERTAIN 268B SKID STEER LOADERS
PRODUCT IMPROVEMENT PROGRAM INSTALLING A BOLT AND A SPACER TO A FUEL LINE ROUTING ON CERTAIN 12H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM INSTALLING A BOLT AND A SPACER TO A FUEL LINE ROUTING ON CERTAIN 12H MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CHECK VALVE IN THE TRACTION CONTROL SYSTEM (TCS) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED CHECK VALVE IN THE TRACTION CONTROL SYSTEM (TCS) ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE COUNTERWEIGHT ON CERTAIN 252B, 262B, AND 268B SKID STEER LOADERS 287B MULTI-TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE COUNTERWEIGHT ON CERTAIN 252B, 262B, AND 268B SKID STEER LOADERS 287B MULTI-TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 836G LANDFILL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE POSITIVE BATTERY CABLE ON CERTAIN 836G LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE JOYSTICK CONTROLS DECAL ON CERTAIN 216B, 226B, 232B, 236B 242B, 246B, 248B, 252B, 262B, AND 268B SKID STEER LOADERS AND 247B, 257B, 267B, 277B, AND 287B MULTI TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE JOYSTICK CONTROLS DECAL ON CERTAIN 216B, 226B, 232B, 236B 242B, 246B, 248B, 252B, 262B, AND 268B SKID STEER LOADERS AND 247B, 257B, 267B, 277B, AND 287B MULTI TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE A-PIN ASSEMBLY WHICH MAY LOSE THE RETAINING RING ON CERTAIN 232B, 242B, 252B, 262B, 268B SKID STEER LOADERS AND 257B AND 287B MULTI TERRAIN LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE A-PIN ASSEMBLY WHICH MAY LOSE THE RETAINING RING ON CERTAIN 232B, 242B, 252B, 262B, 268B SKID STEER LOADERS AND 257B AND 287B MULTI TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BATTERY CABLE AND REMOTE OIL FILTER LINES ON CERTAIN 140H, 143H, 160H, AND 163H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE BATTERY CABLE AND REMOTE OIL FILTER LINES ON CERTAIN 140H, 143H, 160H, AND 163H MOTOR GRADERS