Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines Caterpillar


Product Support Program For Timing Gear Housing Gasket Leaks On Certain Challenger 75 Tractors And 3176 Truck Engines

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS0684" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use " Z" as the SIMS Description Code.

Termination Date

December 31, 1993

Problem

The 7C8255 or 4P8165 Gasket, located between the timing gear housing and the spacer block, may leak on certain Challenger 75 Tractors and 3176 Truck Engines.

Affected Product
Model & Identification Number

Challenger 75 (4CJ1-479)

3176 (2YG1-Up; 7LG1-9753)

Parts Needed

4 - 9M1974 Washer
4 - 9U5177 Inserts (as required)
4 - 6V2317 Bolt (as required)
4 - 6V5219 Bolt (as required)
1 - 7X7973 Gasket Kit*
1 - 1011286 Plate
1 - 1011287 Gasket


*Do not use the existing 7C8255 or 4P8165 Gasket from the gasket kit. Replace it with a 1011287 Gasket.

Action Required

If a 7C8255 or 4P8165 Gasket leaks, refer to Special Instructions SEHS9672, "3176 Engine Timing Gear Housing Gasket Repair" to repair the engine.

Service Claim Allowances

Challenger 75 Tractors

NOTE: This is a 30-hour job.

3176 Truck Engines

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

The Payload Measurement System Control Groups Need To Be Replaced On Certain 777B, 777C, 785B, 789B, 793 And 793B Trucks The Payload Measurement System Control Groups Need To Be Replaced On Certain 777B, 777C, 785B, 789B, 793 And 793B Trucks
Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock Certain 2S7264 And 3S1467 Fuel Injection Pump Assemblies Need To Be Removed From Parts Stock
Product Support Program For Installing Resilient Hood Mounts On Certain 793 And 793B Trucks Product Support Program For Installing Resilient Hood Mounts On Certain 793 And 793B Trucks
The 3E6008 Transmission Control Group Needs To Be Replaced On Certain 769C, 771C, 773B, 775B, And 777C Trucks The 3E6008 Transmission Control Group Needs To Be Replaced On Certain 769C, 771C, 773B, 775B, And 777C Trucks
Product Support Program For Repairing The Contour Seats On Certain D5H, D6H, D7H, D8H, D8N, D9N, And D10N Track Type Tractors; D20D, D250D, D300D, D40D, And D400D Articulated Truckes; 963 And 973 Track Loaders; 936F, 950F, 966F, And 980F Wheel Loader Product Support Program For Repairing The Contour Seats On Certain D5H, D6H, D7H, D8H, D8N, D9N, And D10N Track Type Tractors; D20D, D250D, D300D, D40D, And D400D Articulated Truckes; 963 And 973 Track Loaders; 936F, 950F, 966F, And 980F Wheel Loader
Product Support Program For Replacing The Rear Wheel Assemblies On Certain 438 Backhoe Loaders Product Support Program For Replacing The Rear Wheel Assemblies On Certain 438 Backhoe Loaders
The Swing Cylinder Trunnion Cap Assembly Needs To Be Replaced On Certain 428B And 438B Backhoe Loaders The Swing Cylinder Trunnion Cap Assembly Needs To Be Replaced On Certain 428B And 438B Backhoe Loaders
Product Support Program For Installing A New Flow Priority Valve Or Check Valves In Certain D300D Articulated Trucks Product Support Program For Installing A New Flow Priority Valve Or Check Valves In Certain D300D Articulated Trucks
Product Support Program For Replacing The 3E7543 Sender Switch Assembly For Hydraulic Oil Temperature On Certain Challenger 65 And Challenger 75 Tractors Product Support Program For Replacing The 3E7543 Sender Switch Assembly For Hydraulic Oil Temperature On Certain Challenger 65 And Challenger 75 Tractors
Product Support Program For Replacing Multi-Row Module Core Assemblies On Certain D5H Tractors Product Support Program For Replacing Multi-Row Module Core Assemblies On Certain D5H Tractors
Exhaust Pipe Guarding Needs To Be Installed On Certain D20D And D250D Articulated Trucks Exhaust Pipe Guarding Needs To Be Installed On Certain D20D And D250D Articulated Trucks
Product Support Program For Installing New Bearings And Bolts ,in The Torque Converter Of Certain 789 Trucks Product Support Program For Installing New Bearings And Bolts ,in The Torque Converter Of Certain 789 Trucks
The Engine Air Inlet Lines On Certain Challenger 65C And Challenger 75C Tractors Need To Be Reworked The Engine Air Inlet Lines On Certain Challenger 65C And Challenger 75C Tractors Need To Be Reworked
The Steering System Needs To Be Modified On Certain 793 And 793B Trucks The Steering System Needs To Be Modified On Certain 793 And 793B Trucks
A Decal Needs To Be Applied To The Dash Of Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks A Decal Needs To Be Applied To The Dash Of Certain 768C And 772B Tractors; And 769C, 771C, 773B, And 775B Trucks
The Fan Spider Assembly Needs To Be Replaced On Certain 793 And 793B Trucks The Fan Spider Assembly Needs To Be Replaced On Certain 793 And 793B Trucks
The Backup Alarm On Certain 910F Loaders, IT12F And IT14F Tool Carriers Needs To Be Replaced The Backup Alarm On Certain 910F Loaders, IT12F And IT14F Tool Carriers Needs To Be Replaced
Product Support Program For Installing New Drive Line Yokes On Certain D20D, D25D, D30D, D40D, D250D, D300D, D350D, And D400D Articulated Trucks Product Support Program For Installing New Drive Line Yokes On Certain D20D, D25D, D30D, D40D, D250D, D300D, D350D, And D400D Articulated Trucks
Product Support Program For Replacing The Fuel Line Clamp On The Number-Two Fuel Injection Line On Certain 775B Trucks And 992D Loaders Product Support Program For Replacing The Fuel Line Clamp On The Number-Two Fuel Injection Line On Certain 775B Trucks And 992D Loaders
Pressure Sensor Needs To Be Relocated On Certain D300D Articulated Trucks Pressure Sensor Needs To Be Relocated On Certain D300D Articulated Trucks
A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules A Directional Shift Management System Needs To Be Installed On Certain 768C Tractors; 769C, 771C, 773B, And 775B Trucks; And OEM Power Modules
The Radiator Needs To Be Changed On Certain 416B Backhoe Loaders The Radiator Needs To Be Changed On Certain 416B Backhoe Loaders
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Product Support Program For Replacing The Bucket Cylinder On 426B And 436B Loaders Equipped With Extendible Sticks Product Support Program For Replacing The Bucket Cylinder On 426B And 436B Loaders Equipped With Extendible Sticks
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.