A New Transmission Arrangement for 797F Off-Highway Trucks is Now Available {1408, 3030, 3160, 3168}
- Off-Highway Truck/Tractor
- 797F (S/N: LAJ1-659; WSP1-129; LTZ1-151)
Reference: Special Instruction, M0100737, "Procedure to Upgrade the Transmission Arrangement on Certain 797F Off-Highway Trucks"
Description Of Change: A new transmission arrangement is now available on the machines listed above. The transmission arrangement provides optimal valve actuation and is also more resistant to oil contamination.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Show/hide table
| |
| Illustration 1 | g06410542 |
|
(1) | |
Show/hide table
| Required Parts | |||
|---|---|---|---|
| Item | Qty | Part Number | Part Name |
| 1 | 1 | Transmission Ar | |
For the complete list of parts and procedure to install transmission arrangement (1), refer to Special Instruction, M0100737, "Procedure to Upgrade the Transmission Arrangement on Certain 797F Off-Highway Trucks".
The special instruction can be found on the Caterpillar service information system (SIS) and through the normal literature distribution system at your local Cat dealer.
Caterpillar Information System:
The Serpentine Belt May Fail on Certain 320, 320 GCand 323 Excavators {1405} The Serpentine Belt May Fail on Certain 320, 320 GCand 323 Excavators {1405}
Generator Rear Bearing Grease Tube Group May Get Plugged on Certain 3516 Series Engines {4471} Generator Rear Bearing Grease Tube Group May Get Plugged on Certain 3516 Series Engines {4471}
Use Proper Tooling And Torque When Servicing Fuel Injection Lines {0701, 1252} Use Proper Tooling And Torque When Servicing Fuel Injection Lines {0701, 1252}
Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620} Intermittent and Startup Satellite Connection Issues May Occur on Certain MS952 and MS955 Global Navigational Satellite System (GNSS) Receivers {1408, 7010, 7606, 7620}
Channel 1 Videos for Certain Large Off-Highway Trucks are Now Available {0374, 7000} Channel 1 Videos for Certain Large Off-Highway Trucks are Now Available {0374, 7000}
Improved Vent Fan is Now Used on Certain Generator Sets {4450} Improved Vent Fan is Now Used on Certain Generator Sets {4450}
A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901} A 337-2 Code Will Not Reset on Certain C32 and 3500 Generator Sets with ADEM III Electronic Control Modules {1901}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Calibration Information - Cat ET
Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422} Troubleshooting Procedure is Now Available for Water In Liquid Level Sensor on Certain Excavators {7422}
Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451} Adding the Jacket Water Coolant Pressure Monitor to the Digital Control Unit {191W, 7451}
Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471} Box Handling and Storage of Cat® PVT 110 and PVT 110 ARC Photo Voltaic Module {1471}
New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481} New Improved Fuel Level Sensor Assembly is Now Used on Certain Generator Sets and Power Modules {1439, 7481}
New Suction Fan Assembly Is Now Available for Certain 320, 320 GC, 323, 330 and 330 GC Excavators {1356} New Suction Fan Assembly Is Now Available for Certain 320, 320 GC, 323, 330 and 330 GC Excavators {1356}
A New Torque Procedure for Solenoid Cap Screws on the Main Control Valve is Now Used on Certain 307.5, 308, 309, 310 Mini Hydraulic Excavators {5051, 5264, 5479} A New Torque Procedure for Solenoid Cap Screws on the Main Control Valve is Now Used on Certain 307.5, 308, 309, 310 Mini Hydraulic Excavators {5051, 5264, 5479}
Procedure to Replace Solenoid Valve on Main Control Valve for Certain 307.5, 308, 309, 310 Mini Hydraulic Excavators {5051, 5264, 5479} Procedure to Replace Solenoid Valve on Main Control Valve for Certain 307.5, 308, 309, 310 Mini Hydraulic Excavators {5051, 5264, 5479}
140 Motor Grader Power Train Front Axle - Remove and Install
3512C and 3516C Marine Engines Heat Exchanger - Disassemble
3512C and 3516C Marine Engines Heat Exchanger - Assemble
Coupling Inspection and Replacement on Certain Petroleum Transmissions {3252} Coupling Inspection and Replacement on Certain Petroleum Transmissions {3252}
Tilt Rotator Control Group Installation Procedure for Certain Mini Hydraulic Excavators {1408, 5705} Tilt Rotator Control Group Installation Procedure for Certain Mini Hydraulic Excavators {1408, 5705}
Crankshaft Seal Installation {1160, 1161} Crankshaft Seal Installation {1160, 1161}
Storage Location for the Bucket Pins Is Now Available for Certain 308 and 309 Mini Hydraulic Excavators {6513} Storage Location for the Bucket Pins Is Now Available for Certain 308 and 309 Mini Hydraulic Excavators {6513}
The XQ425 Trailer May Have Water in the Hubs {6331, 7274} The XQ425 Trailer May Have Water in the Hubs {6331, 7274}
New Software is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7620} New Software is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7620}