Software Update is Now Used on Certain 3500 Engines {1920}
- Engine
- 3508B (S/N: 2HW1-394)
- 3512C (S/N: LN51-176; LM91-101; ELG1-101; LLK1-144; PNN1-100; PFP1-100; RMS1-339)
- 3516B (S/N: LEK1-158; 1NW1-203)
- 3512C (S/N: LN51-176; LM91-101; ELG1-101; LLK1-144; PNN1-100; PFP1-100; RMS1-339)
- Petroleum Engine
- 3508C PETROLEUM (S/N: LLC1-236; C8E1-101)
- 3512C PETROLEUM (S/N: LLA1-5208,81001-81004; LLB1-164)
Description Of Change: The new software used has an improvement to help prevent electrical noise.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
The software update contains the following improvement:
- Air filter differential pressure derate has changed to be based off the current differential pressure instead of the peak differential pressure.
Show/hide table
| New Part Number | Part Name | Previous Part Number |
|---|---|---|
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software | ||
| Engine Software |
Caterpillar Information System:
A New Procedure for Installing a Radiator Hose Support Is Now Used on Certain 320 GC, 320 and 323 Excavators {1380, 5057} A New Procedure for Installing a Radiator Hose Support Is Now Used on Certain 320 GC, 320 and 323 Excavators {1380, 5057}
784C and 785C Off-Highway Truck/Tractors Machine Storage
C18 Generator set and C18 Marine Engines Vibration Damper and Pulley - Remove and Install
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Crankshaft Rear Seal - Remove and Install
C18 Generator set and C18 Marine Engines Electronic Control Module - Remove and Install
G3500H Generator Set Engine Restriction of Air Inlet and Exhaust
C18 Generator set and C18 Marine Engines Electric Starting Motor - Remove and Install
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Prepare the Machine for Maintenance
C18 Generator set and C18 Marine Engines Coolant Temperature Sensor - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Product Description
320D3 and 323D3 Excavators Machine System Specifications Final Drive
C18 Generator set and C18 Marine Engines Fuel Pressure Sensor - Remove and Install
Documentation Required for C175 Machine Engines that Experience Unexpected Engine Shutdowns {1000, 7418, 7760} Documentation Required for C175 Machine Engines that Experience Unexpected Engine Shutdowns {1000, 7418, 7760}
3500C IMO III Engines Sensor Signal (Analog, Active) - Test
Aftercoolers May be Missing the Internal Baffle on Certain 3500 Engines {1063, 1063} Aftercoolers May be Missing the Internal Baffle on Certain 3500 Engines {1063, 1063}
G3500H Generator Set Engine Measuring Inlet Manifold Temperature
3500C IMO III Engines Sensor Signal (Analog, Passive) - Test
C18 Generator set and C18 Marine Engines Vibration Damper Guard - Remove and Install
Well Stimulation Pumps Glossary
3500C IMO III Engines Sensor Supply - Test
Well Stimulation Pumps Reference Material
Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200} Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove and Install
Improved Locomotive Secondary Fuel Filter Base on Certain C175 Engines {1261, 1702} Improved Locomotive Secondary Fuel Filter Base on Certain C175 Engines {1261, 1702}