Improved Locomotive Secondary Fuel Filter Base on Certain C175 Engines {1261, 1702}
- Engine
- C175-16 (S/N: 3B91-104)
- C175-20 (S/N: R4F1-141)
Description Of Change: An improved fuel filter base. Modified dimensional tolerances within manifold to better center the sealing surfaces of the canister and prevent fuel leaks.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Replace the fuel filter base with the same part number, new revision that has production improvements implemented.
Show/hide table
| Qty | Part Number | Part name |
|---|---|---|
| 1 | Fuel Filter Gp | |
| 1 | Fuel Filter Gp |
Caterpillar Information System:
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove and Install
Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200} Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}
Well Stimulation Pumps Reference Material
3500C IMO III Engines Sensor Supply - Test
Well Stimulation Pumps Glossary
C18 Generator set and C18 Marine Engines Vibration Damper Guard - Remove and Install
3500C IMO III Engines Sensor Signal (Analog, Passive) - Test
G3500H Generator Set Engine Measuring Inlet Manifold Temperature
Aftercoolers May be Missing the Internal Baffle on Certain 3500 Engines {1063, 1063} Aftercoolers May be Missing the Internal Baffle on Certain 3500 Engines {1063, 1063}
3500C IMO III Engines Sensor Signal (Analog, Active) - Test
Documentation Required for C175 Machine Engines that Experience Unexpected Engine Shutdowns {1000, 7418, 7760} Documentation Required for C175 Machine Engines that Experience Unexpected Engine Shutdowns {1000, 7418, 7760}
Software Update is Now Used on Certain 3500 Engines {1920} Software Update is Now Used on Certain 3500 Engines {1920}
Procedure for Reworking Radiator Cores With New Core Washers and Gaskets on Certain XQC1600 Power Modules {1353} Procedure for Reworking Radiator Cores With New Core Washers and Gaskets on Certain XQC1600 Power Modules {1353}
3500C IMO III Engines Engine Control Switch - Test
New Harness Assembly is Now Used on XQ35 and XQ60 Generator Sets {4459} New Harness Assembly is Now Used on XQ35 and XQ60 Generator Sets {4459}
A Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks is Available {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200} A Procedure for Heating Steering Components to Facilitate Field Disassembly of Pin-Cylinders and Ball Studs on Large Mining Trucks is Available {0679, 0732, 4006, 4016, 4251, 4300, 4305, 7200}
G3500H Generator Set Engine Measuring Inlet Manifold Pressure
Diesel Particulate Filter (DPF)/Selective Catalytic Reduction (SCR) Intake Temperature Sensor Troubleshooting on Certain C7.1 Engines {107C, 108F, 1919, 7569} Diesel Particulate Filter (DPF)/Selective Catalytic Reduction (SCR) Intake Temperature Sensor Troubleshooting on Certain C7.1 Engines {107C, 108F, 1919, 7569}
3500 Engines Air Starting Motor
C18 Generator set and C18 Marine Engines Alternator - Remove and Install
C27 and C32 Tier 4 Engines Air Shutoff - Test
320D3 and 323D3 Excavators Machine System Specifications Gear Pump
3500 Engines Thermocouple
320D3 and 323D3 Excavators Systems Relief Valve (Cushion Crossover) - Anti-Reaction Valve