C18 Generator Set Engines Caterpillar

Disassembly Procedure

Show/hide table

NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates.

1. Drain diesel exhaust fluid into a suitable container for storage or disposal.
   Show/hide table

   Illustration 1	g03365452

   Note: Refer to Special Instruction, REHS8231, "Removal Procedures for Diesel Exhaust Fluid (DEF) Connectors" for the correct removal procedure of hose assemblies (4).

2. Remove clips (1) and (5). Disconnect harness assemblies (2). Remove hose assemblies (4) and hoses (3).
   Show/hide table

   Illustration 2	g03365463

3. Remove cable straps (6) and disconnect harness assembly (7).
   Show/hide table

   Illustration 3	g03365465

4. Remove bolts (8), plate (9), manifold (10), and the gasket (not shown).
   Show/hide table

   Illustration 4	g03365468

5. Remove bolts (11).
   Show/hide table

   Illustration 5	g03365475

6. Remove bolt (12).
   Show/hide table

   Illustration 6	g03365477

7. Remove bolts (13) and pump assembly (14).
   Show/hide table

   Illustration 7	g03365493

8. Remove bolts (15) and bracket (16) from the tank .
   Show/hide table

   Illustration 8	g03365514

9. Remove bolt (18) and cap (17). Remove bolts (19) and manifold (20).
   Show/hide table

   Illustration 9	g03365521

10. Remove O-ring seals (23) from cap (21). Remove plug (24) and plug (25) from manifold (21).
    Show/hide table

    Illustration 10	g03365528

11. Disconnect harness assembly (26) and remove solenoid assembly (27).
    Show/hide table

    Illustration 11	g03365540

12. Remove relays (28).
    Show/hide table

    Illustration 12	g03365547

13. Remove bolts (29). Remove control module (30).
    Show/hide table

    Illustration 13	g03365554

14. Disconnect harness assembly (33). Remove cable straps (32). Remove electronic control (31).
    Show/hide table

    Illustration 14	g03383608

15. Remove cover (34).
    Show/hide table

    Illustration 15	g03383609

16. Remove expansion device (35).
    Show/hide table

    Illustration 16	g03383610

17. Remove filter (36).
    Show/hide table

    Illustration 17	g03366015

18. Remove cable straps (38), bolts (39), and bracket (37).
    Show/hide table

    Illustration 18	g03366035

19. Disconnect harness assembly (40).
    Show/hide table

    Illustration 19	g03366046

20. Remove bolts (41). Separate support assembly (42) from pump (43).
    Show/hide table

    Illustration 20	g03366053

21. Remove cable straps (45) and harness assembly (44).
    Show/hide table

    Illustration 21	g03366057

    Note: Place identification marks on fittings (46) for installation purposes. Fittings (46) are not interchangeable.

22. Remove fittings (46) and the O-ring seals.
    Show/hide table

    Illustration 22	g03383611

23. Remove bracket (47). Remove hose assembly (48).
    Show/hide table

    Illustration 23	g03383612

24. Remove nuts (52). Remove straps (51). Remove tank (48) from support assembly (50).