HPU300 Hydraulic Power Pack Caterpillar


Indicators and Gauges - Check

Usage:

HPU300 AP3
Check the indicator lights once per day.

Green indicator light:

Switch on the power pack and make sure that the green indicator light illuminates.

Red indicator light

Press the emergency off button and make sure that the red indicator light illuminates.

Note: Do not put the power pack into operation if one or more indicator lights are malfunctioning. Have malfunctioning indicator lights immediately replaced by a Cat dealer.

Caterpillar Information System:

G3500 Generator Sets Maintenance Interval Schedule - Natural Gas
G3500 Generator Sets Maintenance Interval Schedule - Turbocharged Aftercooled
G3500 Generator Sets Maintenance Interval Schedule - Bio Gas
C12.9 Marine Propulsion Engine Air Inlet and Exhaust System
C7.1 Commercial Marine Engine Glossary of Electronic Control Terms
Installation of the New Clamping Assemblies On Coolant Tubes For Certain 3524 Engines {1380} Installation of the New Clamping Assemblies On Coolant Tubes For Certain 3524 Engines {1380}
C12.9 Marine Propulsion Engine Fuel System
3412C Generator Sets Fuel System Primary Filter/Water Separator - Drain
G3516 TA Engine Solenoid Valve - Test
3412C Generator Sets Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1/4.2 If equipped
3412C Generator Set Model View Illustrations
3500E Marine Engines Maintenance Interval Schedule
Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562} Inspection Procedure for Boom Cylinder Assembly Cracks on Certain 330B, 330C, 345B, 345C, and 345D Excavators {5456, 7562}
Certain C9 Industrial Engines Can Over Speed After Start Up {1920} Certain C9 Industrial Engines Can Over Speed After Start Up {1920}
HPU300 Hydraulic Power Pack Hydraulic System Oil Level - Check
A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Engines {108H} A New Diesel Exhaust Fluid Filter is Now Available for C7.1 Engines {108H}
Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565} Technical Analysis 1 (TA1) Visual Inspection for Cold Planer {0372, 1000, 7000, 753T, 7565}
A New Crankshaft Is Available For Certain C4.4 Engines {1202} A New Crankshaft Is Available For Certain C4.4 Engines {1202}
G3500 Engines Configuration Parameters
G3500 Engines Cold Weather Starting
G3500 Engines Starting the Engine
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 03
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 04
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1674 - FMI 05
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.