1981/10/21 Caterpillar


List Of Service Publications

Usage:


This service information has become available since the last list published in the September 16, 1981 issue of Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.

Caterpillar Information System:

1981/10/21 Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter
1981/10/21 Engine Slobbering; New Piston And Rings Used
1981/09/16 New Support Prevents Vibration Of Left Side Oil Filters
1981/09/16 Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/16 Troubleshooting: Water Pump Failures
1981/09/16 Spring Pins No Longer Used In Water Pump Drive Gear
1981/09/16 List Of Service Publications
1981/09/16 Troubleshooting The Fuel Ratio Control Group For Low Power Complaints
1981/09/16 Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16 FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System
1981/08/26 Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/08/26 6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/10/21 New Dual Speed Switch Is Now Available
1981/10/21 Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up
1981/10/21 Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21 Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21 Use Of Engine Supports On Flywheel Housing Can Change Face And Bore Runout Measurements
1981/10/21 New Cylinder Block Permits Use Of A Small-Frame Turbocharger
1981/11/25 New Regulator And Field Coil Assemblies Used
1981/11/25 Part Number For Fuel Injection Pump Group In New Location
1981/11/25 New Parts And Assembly Procedure Used On Main Shaft
1981/11/25 Reference Chart For Major Production Changes On 3208 Engines
1981/11/25 Improved Element Assemblies Used In Jacket Water Heaters
1981/11/25 New Clearance Specifications For Oil Pump Rotor Tip
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.