1981/09/16 Caterpillar


List Of Service Publications

Usage:


This service information has become available since the last list published in the July 1, 1981 issue of Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.

Caterpillar Information System:

1981/09/16 Troubleshooting The Fuel Ratio Control Group For Low Power Complaints
1981/09/16 Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals
1981/09/16 FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System
1981/08/26 Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/08/26 6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation
1981/08/26 Coolant Conditioner Elements And Their Capacities
1981/08/26 Explanation Of Differences In Timing Advance Information
1981/08/26 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts
1981/08/26 Plastic Plugs Now Used To Hold Piston Pins In Bendix Air Compressors
1981/08/26 New Information System For Engine Gasket Kits
1981/08/26 Washer, Seal Added To Improve Oil Filter Assembly
1981/08/26 Top Rings For Pistons Have Two Designs
1981/09/16 Spring Pins No Longer Used In Water Pump Drive Gear
1981/09/16 Troubleshooting: Water Pump Failures
1981/09/16 Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/16 New Support Prevents Vibration Of Left Side Oil Filters
1981/10/21 Engine Slobbering; New Piston And Rings Used
1981/10/21 Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter
1981/10/21 List Of Service Publications
1981/10/21 New Dual Speed Switch Is Now Available
1981/10/21 Lubricant Gives Protection To Camshaft And Roller During Initial Start-Up
1981/10/21 Wrong Assembly Or Adjustment Of Governor Linkage Can Cause Failure
1981/10/21 Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21 Use Of Engine Supports On Flywheel Housing Can Change Face And Bore Runout Measurements
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.