UPS 750 Uninterruptible Power Supply Caterpillar


Air Filter Element - Clean/Replace

Usage:

UPS 750 AD2

清洁空气滤清器

工作 90 天后,清洁滤清器。 如果环境使然,应更频繁地清洁滤清器。 下文列出了滤清器的清洁指南:

  • 滤清器中积聚过多灰尘。

  • 滤清器因气流阻塞而过度偏转。

  • 存在系统温度稳步上升的警告。

拆卸

  1. 打开外钢丝网门,以接近滤清器。 使用飞利浦螺丝刀,松开钢丝网门顶部和底部角落的螺钉。

  2. 拆下空气滤清器。

安裝

  1. 将空气滤清器置于门的打开部分。

    注: 在门中安装滤清器前,确保滤清器干燥。

  2. 关闭外钢丝网门。 拧紧外钢丝网门顶部和底部的螺钉,以将滤清器固定到位。

Caterpillar Information System:

C7.1 Marine Engine Turbocharger - Inspect
C18 Marine Engine Coolant - Change
TH48-E80 Petroleum Transmission Maintenance Interval Schedule
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Decommissioning and Disposal
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Winding Insulation Resistance - Test
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Sleeve Bearing - Check
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Roller Bearing - Check
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors General Construction - Check
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Cooling Filter - Clean
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Bearing Insulation - Clean
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Maintenance Recommendations
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Maintenance Program
C18 Marine Generator Set Starting the Engine
C18 Marine Generator Set Cold Weather Operation
C18 Marine Generator Set Control Panel
C7.1 Marine Engine Engine Oil Cooler - Inspect
349F and 352F Excavators Machine System Specifications Relief Valve (Swing Pressure)
C8.7 Marine Engine Fuel Pressure Regulator - Remove and Install
C18 Marine Generator Set Additional Messages
C7.1 Commercial Marine Engine Cylinder Head - Inspect
797F Off-Highway Truck Diesel Exhaust Fluid Injector - Replace - Emission Related Component
C18 Marine Generator Set Voltage Regulators
C18 Marine Generator Set Product Storage
New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N} New Nitrogen Oxide Sensor Groups Are Used for Certain G3400 and G3500 Engines {191N}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.