Exhaust Manifold
Show/hide table
| |
| Illustration 1 | g03795573 |
Show/hide table
| Specification for 419-6789 Exhaust Manifold Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 10 | 444-7919 Taperlock Stud | Torque to |
| 2 | 4 | 186-0870 Taperlock Stud | Torque to |
| 3 | 10 | 344-5675 Nut | Tighten the nut in the numerical sequence as shown in Illustration to |
| Again, tighten the nut in the numerical sequence as shown in Illustration to |
|||
Caterpillar Information System:
C9.3 Marine Engines Cylinder Head Valves
3516C Marine Engines Accessory Drive (Front) - Remove and Install
794 AC Off-Highway Truck Power Train Sensor - Remove and Install - Contactor Current
390F MHPU Mobile Hydraulic Power Unit Machine Systems Pump Control (Negative Flow) - Test
794 AC Off-Highway Truck Power Train Sensor - Remove and Install - Voltage
794 AC Off-Highway Truck Power Train Sensor - Remove and Install - DC Bus Current
C8.7 and C12.9 Marine Engines Sea Water Pump Pressure Problem
C8.7 and C12.9 Marine Engines Indicator Lamp - Test
794 AC Off-Highway Truck Power Train Resistor - Remove and Install - DC Bus Discharge Resistors
C8.7 Marine Engine Clutch (Supercharger) - Remove and Install
794 AC Off-Highway Truck Power Train Electronic Control Module - Remove and Install - Motor No. 2
794 AC Off-Highway Truck Power Train Electronic Control Module - Remove and Install - Motor No. 1
C7.1 Engines Solenoid Valve - Test - Solenoid Valves that Connect to the Dosing Control Unit (DCU)
C4.4 Engines Exhaust Temperature Is High
C2.2 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
C2.2 Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
C3.4B Engines for Caterpillar Built Machines Flexible Exhaust Pipe - Remove and Install - Flexible Exhaust Pipe Between DOC and the SCR
C3.4B Engines for Caterpillar Built Machines Selective Catalytic Reduction (SCR) Canister - Remove and Install
C3.4B Engines for Caterpillar Built Machines Clean Emissions Module - Remove and Install - Flywheel Mounted Diesel Oxidation Catalyst (DOC)
C3.4B Engines for Caterpillar Built Machines Clean Emissions Module - Remove and Install - Top Mounted Diesel Oxidation Catalyst (DOC)
Bench Test Procedure for Hydraulic Piston Pumps {5070} Bench Test Procedure for Hydraulic Piston Pumps {5070}
C4.4 Engines Soot Sensor - Test
390F MHPU Mobile Hydraulic Power Unit Machine Systems Power Shift Pressure - Calibrate
3516C Marine Engines Crankshaft Front Seal and Wear Sleeve - Remove and Install