Valve Mechanism Cover
Show/hide table
Illustration 1 | g03791061 |
Typical example |
(1) Tighten the cap nuts for the valve mechanism cover to the following torque. ...
Caterpillar Information System:
C2.2 Engines for Caterpillar Built Machines Rocker Shaft
C3.4B Engines NRS Mass Flow Rate Problem
C13 Generator Set Engine Exhaust Elbow - Remove and Install
2015/02/06 A New Special Instruction is Available to Adjust the Steering Shaft on Certain Off-Highway Trucks {4310}
Field Procedure to Adjust the Steering Shaft on Certain Off-Highway Trucks{4310, 4343} Field Procedure to Adjust the Steering Shaft on Certain Off-Highway Trucks{4310, 4343}
3512E Engines Water Temperature Regulators - Remove and Install - SCAC
3512E Engines Water Temperature Regulators - Remove and Install - Jacket Water
C13 Generator Set Engine Engine Oil Pan - Remove and Install
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (Exhaust)
C7.1 Engines DEF Line Heater - Test
C2.2 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C2.2 Engines for Caterpillar Built Machines Belt Tension Chart
C15 Generator Set Rotating Rectifier - Inspect/Test
C7.1 Engines DEF Pump Motor - Test
G3500H 60Hz Generator Sets Overhaul (Major)
New O-Ring Seals Are Available for Ignition Coil Extenders on Certain G3500 and G3600 Engines {1550, 1561} New O-Ring Seals Are Available for Ignition Coil Extenders on Certain G3500 and G3600 Engines {1550, 1561}
3512E Engines Water Pump - Remove and Install
2015/02/27 A New Intake Plenum Plate Assembly Is Used on G3508B and G3516B Petroleum Engines {1094}
C13 Generator Set Engine Belt Tensioner - Remove and Install
C7.1 Engines DEF Pump Pressure Sensor - Test
C7.1 Engines DEF Pump Sensor Supply - Test
C7.1 Marine Generator Set Refill Capacities
C7.1 Engines DEF Return Valve - Test
3512E Engines Auxiliary Water Pump - Remove and Install