Air Inlet Manifold - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | - | Loctite Speedbonder H3000 | 1 |
开始:
- 拆下油门控制阀
- 拆下燃油控制阀
- 拆下后冷器
- 拆下弯头 (3)。
- 拆下螺栓 (1 )。
- 拆下进气盖 (2) 和进气盖 (4)。 进气盖 (2) 的重量约为
37 kg (82 lb) 。 进气盖 (4) 的重量约为30 kg (66 lb) 。Show/hide table图 2 g03730860 - 卸下螺栓 (5)。
- 拆下螺栓 (10) 和螺栓 (11)。
- 拆下进气歧管 (9) 和进气歧管 (8)。 进气歧管 (9) 的重量约为
58 kg (128 lb) 。 进气歧管 (8) 的重量约为58 kg (128 lb) 。 - 拆下螺栓 (6) 和进气适配器 (7)。
Show/hide table
图 3 g03730913 - 拆下螺栓 (12) 和板 (13)。
Show/hide table
图 1 | g03730818 |
- 按与拆卸相反的顺序安装进气歧管 (8) 和进气歧管 (9)。
- 将工具 (A) 轻轻地涂抹到弯头 (3) 的孔和进气适配器 (7) 上。
Caterpillar Information System:
Radiator for C4.4 Marine Generator Set{1353} Radiator for C4.4 Marine Generator Set{1353}
C3.4B Engines Relay - Test - Start Relay
XQ400 Power Module Gas Pressure Regulator - Test
XQ400 Power Module Engine Performance - Test
XQ400 Power Module Control Panel - Inspect/Test
CG137-08 and CG137-12 Engines Catalytic Converter Substrate - Inspect
XQ400 Power Module Exhaust Bypass - Inspect
XQ400 Power Module Ignition System Timing - Check/Adjust
XQ400 Power Module Carburetor Air/Fuel Ratio - Check/Adjust
G3520H Generator Set Engine Turbocharger - Assemble
C7 and C9 Industrial Engines Injection Actuation Pressure - Test
C280 Marine Engines Exhaust Temperature - Test
DE Series Generator Set With Cat C7.1 Engine Product Description
2014/10/03 Cat® Reman Announces Additional C7 Engine Options for Certain Thomas Built Bus Applications {1000, 1201}
Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278} Engine System Setup for Certified CG137-12 Generator Set Engines {1270, 1278}
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Air Shutoff - Test
DE Series Generator Set With Cat C7.1 Engine Safety Messages
DE Series Generator Set With Cat C7.1 Engine Model View Illustrations
DE Series Generator Set With Cat C7.1 Engine Refill Capacities and Recommendations
352F Excavator Plate Locations and Film Locations
C3.4B Engines Sensor (Data Link Type) - Test - Ammonia Sensor
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
794 AC Off-Highway Truck Machine Systems Service and Parking Brake (Front) - Remove and Install
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}