Air Cleaner Housing - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- The engine can start automatically. Ensure that the power supply is isolated before any service or repairs is performed.
Show/hide table
Illustration 1 g01543133 - Disconnect hose (1) from bracket (2).
- Loosen clamp (5) and clamp (7). Remove hose assembly (6) from air cleaner (3) and the turbocharger.
- Remove bolts (4) (not shown). There are four bolts in total.
- Remove air cleaner housing (3) from the mounting bracket for the air cleaner housing.
- Install air cleaner housing (3) in the reverse order of removal.
Caterpillar Information System:
C7.1 Marine Engine Engine Oil Relief Valve - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valve Springs - Remove and Install
C7.1 Marine Engine Camshaft Gear - Remove and Install
C7.1 Marine Engine Camshaft - Remove and Install
C7.1 Marine Engine Lifter Group - Remove and Install
C7.1 Marine Engine Bearing Clearance - Check
C7.1 Marine Engine Crankshaft Gear - Remove and Install
C7.1 Marine Engine Crankshaft Timing Ring - Remove and Install
C7.1 Marine Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Marine Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Engine Jacket Water Heater - Remove and Install
C7.1 Marine Engine Electric Starting Motor - Remove and Install
C7.1 Industrial Engine Plate Locations and Film Locations
C7.1 Marine Engine Control System - Remove and Install - M.C.S. Panel
C15 and C18 Engines Product Storage
C7.1 Industrial Engine Reference Information
C7.1 Industrial Engine Emissions Certification Film
2013/02/20 A New Water Temperature Regulator Housing Is Now Available for Certain C15 and C18 Industrial Engines {1355, 1393}
3516C Petroleum Well Service Engine Model View Illustrations
3516C Petroleum Well Service Engine Safety Messages
C32 Marine Generator Set Starting the Engine
TA2 Inspection for C18 Marine Auxiliary Engines{1000} TA2 Inspection for C18 Marine Auxiliary Engines{1000}