3516C Generator Set Engines Caterpillar


Liquid Level Sensor (DEF)

Usage:

3516C LY6


Illustration 1g02702817

Table 1
Specification for 310-7137 Liquid Level Sensor As 
Item  Qty  Part  Specification Description 
8T-4127 Screw  Torque to 1.13 to 1.69 N·m (10.00 to 14.96 lb in)
Operating voltage is 12 V. 
Supply current is 50 mA. 
Output type is analog. 

Caterpillar Information System:

3516C Generator Set Engines Magnetic Switch (DEF Tank Heater)
Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383} Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383}
C15 Engines for Combat and Tactical Vehicles Electronic Unit Injector - Adjust
CG137-08 and CG137-12 Generator Sets Turbocharger
TH55FT-E70 and TH55FT-E90 Transmissions Daily Inspection
CG137-08 and CG137-12 Engines Crankshaft - Remove and Install
CG137-08 and CG137-12 Engines Crankshaft Main Bearings - Remove and Install
CG137-08 and CG137-12 Engines Camshaft Bearings - Remove and Install
371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
CG137-08 and CG137-12 Engines Camshaft - Remove and Install
CG137-08 and CG137-12 Engines Cylinder Liner - Remove and Install
CG137-08 and CG137-12 Engines Pistons and Connecting Rods - Remove and Install
2011/09/23 New Software Is Now Used to Improve the Programmable Torque Limiting Parameters on Certain C32 Marine Engines {1901, 1920}
G3516 Petroleum Engine Engine Oil Temperature Regulator - Replace
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139} Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139}
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
C32 Marine Engine Overhaul (Top End)
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280} Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
C1.5 and C2.2 Industrial Engines Glow Plugs (ARD Combustion) - Replace
2011/08/23 A New Electronic Hour Meter Is Now Used for Certain Marine Engines {7478}
3516C Generator Set Engines Exhaust Temperature Is High
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.