Turbocharger
Show/hide table
| |
| Illustration 1 | g02701751 |
|
Left side view of engine | |
Show/hide table
| Specification for 365-9401 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 2N-2766 Locknut | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| Torque to |
|||
Show/hide table
| |
| Illustration 2 | g02701857 |
|
Front view of engine | |
Show/hide table
| Specification for 365-9401 Turbocharger Gp | |||
| Item | Qty | Part | Specification Description |
| 2 | 1 | 7W-2297 Clamp As | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| Use the following procedure to tighten the compressor housing clamp:
1. Tighten the clamp to 2. Lightly tap the clamp all around. 3. Again, Tighten the clamp to |
|||
| 3 | 1 | 9N-2038 Turbine Clamp As | Before assembly, lubricate the threads and the bearing surfaces with Loctite C5A Copper Anti-Seize. |
| Use the following procedure to tighten the turbine housing clamp:
1. Tighten the clamp to 2. Lightly tap the clamp all around. 3. Again, Tighten the clamp to |
|||
Caterpillar Information System:
TH55FT-E70 and TH55FT-E90 Transmissions Daily Inspection
CG137-08 and CG137-12 Engines Crankshaft - Remove and Install
CG137-08 and CG137-12 Engines Crankshaft Main Bearings - Remove and Install
CG137-08 and CG137-12 Engines Camshaft Bearings - Remove and Install
371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100} 371-1079 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
CG137-08 and CG137-12 Engines Camshaft - Remove and Install
CG137-08 and CG137-12 Engines Cylinder Liner - Remove and Install
CG137-08 and CG137-12 Engines Pistons and Connecting Rods - Remove and Install
CG137-08 and CG137-12 Engines Cylinder Head - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Rocker Shaft and Push Rod - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Valve Cover Base - Remove and Install - G3412B
CG137-08 and CG137-12 Engines Timing Gears - Remove and Install
C15 Engines for Combat and Tactical Vehicles Electronic Unit Injector - Adjust
Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383} Installation Procedure for Improved Jacket Water Heater on Certain C27 Generator Sets{1383}
3516C Generator Set Engines Magnetic Switch (DEF Tank Heater)
3516C Generator Set Engines Liquid Level Sensor (DEF)
2011/09/23 New Software Is Now Used to Improve the Programmable Torque Limiting Parameters on Certain C32 Marine Engines {1901, 1920}
G3516 Petroleum Engine Engine Oil Temperature Regulator - Replace
G3500H 50Hz Generator Sets Rotating Rectifier - Check
G3500H 60Hz Generator Sets Coolant Temperature Regulator - Replace
Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139} Bench Test Procedure for a TA19-4WD Agricultural Tractor Transmission{3030, 3073, 3139}
CG137-08 and CG137-12 Generator Sets Air Cleaner
CG137-08 and CG137-12 Generator Sets Vibration Damper and Pulley
C32 Marine Engine Overhaul (Top End)