C4.4 Engines for Caterpillar Built Machines Caterpillar


Boost Pressure Sensor

Usage:

316E L DZW


Illustration 1g06071392

Table 1
Specifications for 320-3062 Pressure Sensor Gp 
Item  Qty  Part  Specification Description 
320-3062 Pressure Sensor Gp  Torque to 10 ± 2 N·m (89 ± 18 lb in)

Caterpillar Information System:

C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
TA19 M4WD Agricultural Transmission Transmission Clutches
TA19 M4WD Agricultural Transmission Hydraulic System Schematic
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Passive) - Test
C15 Generator Set Refill Capacities
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Regulatory Information (Japan)
TA19 M4WD Agricultural Transmission Location of Hydraulic Components for Transmission System
C13, C15, and C18 Tier 4 Final Engines Water Pump
C9.3 Engines for Caterpillar Built Machines Water Lines
C27 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
3516C Generator Set Engines Sensor Supply - Test
2013/08/21 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
3516C Generator Set Engines Starting - Test
3406C Industrial Engine Reference Material
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
CG137-08 and CG137-12 Industrial Engines Inlet Manifold Pressure - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Wiring Harness (Open Circuit) - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Wiring Harness (Short Circuit) - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Electrical Connector - Inspect
CG137-08 and CG137-12 Industrial Engines Sensor Supply - Test
C175-16 Generator Set Plate Locations and Film Locations
C175-16 Generator Set Emissions Certification Film
C175-16 Generator Set Engine Operation
TA19 M4WD Agricultural Transmission Transmission Power Flow
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.