Water Pump
Show/hide table
 | |
| 图 1 | g02680797 |
Show/hide table
| 338-1148 水泵总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 5F-3999 O 形密封圈 | 使用 5P-3975 橡胶润滑剂 轻轻润滑 O 形密封圈的孔。 |
| 3 | 1 | 177-1052 轴组件 | 安装期间，使轴组件与壳体平齐。 |
| A | - | - | 从 261-3423 叶轮 (2) 到壳体表面的距离为 9.00 ± 0.25 mm (0.354 ± 0.0010 in)。 |
| B | 1 | 350-5417 密封 | 工作高度为 10.92 ± 0.13 mm (0.430 ± 0.0051in)。 |
| C | - | - | 从 203-6098 毂 (4) 的前表面到壳体表面的距离为 155.8 ± 0.3 mm (6.13 ± 0.01 in)。 |
Show/hide table
 | |
| 图 2 | g02680856 |
发动机前视图 | |
Show/hide table
| 338-1148 水泵总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 5 | 1 | 177-1058 塞 | 安装期间，使塞与壳体平齐，并按图 2 所示定向塞。 |
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Water Lines
C27 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
3516C Generator Set Engines Sensor Supply - Test
2013/08/21 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
TA19 M4WD Agricultural Transmission Location of Electronic Components for Transmission System
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Active) - Test
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Assemble
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Disassemble
3516C Generator Set Engines Sensor Signal (PWM) - Test
C27 and C32 Industrial Engines Auxiliary Drive (Front) - Remove and Install
Retrofitting for Ultra Lean Burn (ULB) on a G3512 Engine{1000, 775E} Retrofitting for Ultra Lean Burn (ULB) on a G3512 Engine{1000, 775E}
TA19 M4WD Agricultural Transmission Location of Hydraulic Components for Transmission System
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Regulatory Information (Japan)
C15 Generator Set Refill Capacities
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Passive) - Test
TA19 M4WD Agricultural Transmission Hydraulic System Schematic
TA19 M4WD Agricultural Transmission Transmission Clutches
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
3516C Generator Set Engines Starting - Test
3406C Industrial Engine Reference Material
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
CG137-08 and CG137-12 Industrial Engines Inlet Manifold Pressure - Test