Hydraulic System Schematic
Show/hide table
 | |
| Illustration 1 | g02711877 |
(1) Test port (2) Transmission clutch (3) Relief valve (charge pressure) (4) Cooler bypass valve (5) Relief valve (lube oil) (6) Hydraulic oil cooler (7) Modulating valve (transmission) (8) Sampling valve (9) Bypass valve (10) Filler cap (11) Hydraulic oil filter (12) Breather (sump) (13) Suction (14) Charge pump | |
Caterpillar Information System:
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Passive) - Test
C15 Generator Set Refill Capacities
303.5E2, 304E2, 305.5E2 and 305E2 Mini Hydraulic Excavators Regulatory Information (Japan)
TA19 M4WD Agricultural Transmission Location of Hydraulic Components for Transmission System
C13, C15, and C18 Tier 4 Final Engines Water Pump
C9.3 Engines for Caterpillar Built Machines Water Lines
C27 Generator Set Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.3/4.4
3516C Generator Set Engines Sensor Supply - Test
2013/08/21 A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
TA19 M4WD Agricultural Transmission Location of Electronic Components for Transmission System
Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288} Checking the High-Pressure Relief Valve for Leakage on C6.6 and C4.4 Engines{1288}
CG137-08 and CG137-12 Industrial Engines Sensor Signal (Analog, Active) - Test
TA19 M4WD Agricultural Transmission Transmission Clutches
C4.4 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
C4.4 Engines for Caterpillar Built Machines Boost Pressure Sensor
3516C Generator Set Engines Starting - Test
3406C Industrial Engine Reference Material
C4.4 Engines for Caterpillar Built Machines Coolant Temperature Sensor
CG137-08 and CG137-12 Industrial Engines Inlet Manifold Pressure - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Wiring Harness (Open Circuit) - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Wiring Harness (Short Circuit) - Test
854K Wheel Dozer, and 992K and 993K Wheel Loaders Monitoring System Electrical Connector - Inspect
CG137-08 and CG137-12 Industrial Engines Sensor Supply - Test
C175-16 Generator Set Plate Locations and Film Locations