C15 Petroleum Engines Caterpillar


Auxiliary Water Pump - Install

Usage:

C15 HAZ

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
5P-3975  Rubber Lubricant 


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g02439839

  1. Position auxiliary water pump (3) on the front housing. Install nuts (1).

  2. Apply Tooling (A) to the O-ring seal on cover (5). Install the O-ring seal, cover (5), and bolts (4) on auxiliary water pump (3).

  3. Position the O-ring seal and elbow (7) on auxiliary water pump (3). Install bolts (6) and band clamp (8). Tighten the band clamp to a torque of 7.3 ± 0.5 N·m (65 ± 4 lb in).

  4. Connect tube assembly (2) to auxiliary water pump (3).

Caterpillar Information System:

C15 Petroleum Engines Auxiliary Water Pump - Remove
Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480} Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480}
CX31 and CX31 HT On-Highway Transmissions Reference Material
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Sample - Obtain
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Level - Check
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Breather (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Maintenance Recommendations
CX31 and CX31 HT On-Highway Transmissions Transmission Control
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Transfer Operation
793F Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Remove and Install - Front Suspension Cylinder
C15 Petroleum Engines Auxiliary Water Pump - Disassemble
2011/03/02 New Software Is Used on C175-16 Generator Sets {1901, 1920}
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
C15 Petroleum Engines Auxiliary Water Pump - Assemble
UPSB505 Uninterruptible Power Supply Cable Size Requirement
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Electrical Connections
2011/06/16 New Fuel Pressure Regulators Are Used on Certain C7 and C9 Engines {1715}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Initial Startup Procedure
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Pager Configuration
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.