Auxiliary Water Pump - Remove
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect tube assembly (2) from auxiliary water pump (3).
- Remove bolts (6) and band clamp (8). Remove elbow (7) and the O-ring seal from auxiliary water pump (3).
- Remove bolts (4), cover (5), and the O-ring seal from auxiliary water pump (3).
- Remove nuts (1) and auxiliary water pump (3) from the front housing.
Show/hide table
Illustration 1 | g02439839 |
Caterpillar Information System:
Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480} Installation Procedure of International Protection Rating (IP32) for the UPSB505{4480}
CX31 and CX31 HT On-Highway Transmissions Reference Material
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Sample - Obtain
CX31 and CX31 HT On-Highway Transmissions Transmission Oil Level - Check
CX31 and CX31 HT On-Highway Transmissions Transmission Oil - Change
CX31 and CX31 HT On-Highway Transmissions Oil Filter (Transmission) - Replace
CX31 and CX31 HT On-Highway Transmissions Magnetic Screen (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Breather (Transmission) - Clean
CX31 and CX31 HT On-Highway Transmissions Maintenance Recommendations
CX31 and CX31 HT On-Highway Transmissions Transmission Control
CX31 and CX31 HT On-Highway Transmissions Serial Number Plate
CX31 and CX31 HT On-Highway Transmissions Safety Messages
C15 Petroleum Engines Auxiliary Water Pump - Install
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Transfer Operation
793F Off-Highway Truck Machine Systems Valve (Suspension Cylinder Charging) - Remove and Install - Front Suspension Cylinder
C15 Petroleum Engines Auxiliary Water Pump - Disassemble
2011/03/02 New Software Is Used on C175-16 Generator Sets {1901, 1920}
C13, C15, and C18 Tier 4 Interim Engines Data Link - Test
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180} Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
C15 Petroleum Engines Auxiliary Water Pump - Assemble
UPSB505 Uninterruptible Power Supply Cable Size Requirement
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Electrical Connections
2011/06/16 New Fuel Pressure Regulators Are Used on Certain C7 and C9 Engines {1715}
UPS 1000Z, UPS 1200Z, UPS500G and UPS600G Uninterruptible Power Supplys Initial Startup Procedure