New Turbochargers Are Now Used on Certain C18 Industrial Engines {1052, 1053}
- Industrial Engine:
- C18 INDUSTRIAL (S/N: JDA1-UP; NBB1-UP; WJH1-UP)
Description of Change: New turbochargers are now used on the engines that are listed above. The new turbochargers have improved thrust bearings.
Adaptable To:
Show/hide table
C18 Industrial Engine Turbocharger Replacement List     | |
Original Turbocharger Part Number     | Replacement Turbocharger Part Number     |
288-7179     | 358-4920     |
328-8887     | 359-5390     |
211-6964     | 359-5392     |
313-9235     | 359-5394     |
290-6936     | 359-5396     |
The new turbochargers are adaptable back to the first serial numbers of the listed engines.
The change is effective at the factory with the engine serial numbers JDA00254-UP, NBB00108-UP, and WJW07216-UP.
Caterpillar Information System:
C27 and C32 Tier 4 Engines Engine Overspeeds
C27 and C32 Tier 4 Engines Engine Cranks but Does Not Start
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Engine Air Cleaner Service Indicator - Inspect
C15 Generator Sets Engine Oil and Filter - Change
C27 and C32 Tier 4 Engines Crankcase Pressure Is High
C27 and C32 Tier 4 Engines Coolant Temperature Is High
C27 and C32 Tier 4 Engines Coolant Level Is Low
C13 Industrial Engines Turbocharger
C27 and C32 Tier 4 Engines Sensor Signal (Analog, Active) - Test
2010/09/10 New Software Is Used on Certain C15 Engines {1901, 1920}
C15 Generator Sets Generator Operation
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
C27 and C32 Engines for Caterpillar Built Machines Cooling System - Check
C27 and C32 Tier 4 Engines Fuel Filter Is Restricted
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Electronic Modular Control Panel 4 (EMCP 4) - EMCP 4.1 / 4.2 / 4.2B
2012/11/30 New Crankshaft for the C6.6 Engines {1202}
C27 and C32 Tier 4 Engines Engine Shutdown While Idling
3500 Engines Aftercooler - Air-to-Air Aftercooler
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551} Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
320E and 323E Excavators Fuel System Water Separator - Drain
3512C HD SR500 Generator Sets Generator Bearing - Inspect
C27 and C32 Tier 4 Engines ECM Software - Install
2010/06/04 A New Starting System for Certain C7 Engines That Are Used in RoadTec Pavers Is Available {1000}
2010/11/24 The Swing Bearing In the Bearing And Gear Group Is Improved on Certain 330D, 345C and 345D Excavators and 345C and 345D Mobile Hydraulic Power Units {7063}