Atmospheric Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (2) from atmospheric pressure sensor (1).
- Remove atmospheric pressure sensor (1) and the O-ring seal.
Show/hide table
| |
| Illustration 1 | g01520168 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install the O-ring seal onto atmospheric pressure sensor (1).
- Install atmospheric pressure sensor (1) and the O-ring seal. Tighten atmospheric pressure sensor (1) to a torque of
10 ± 2 N·m (88 ± 18 lb in) . - Connect harness assembly (2) to atmospheric pressure sensor (1).
Show/hide table
|
| |
| Illustration 2 | g01520168 |
Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
Caterpillar Information System:
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System Event Code List
C15 Petroleum Generator Set Engines Cylinder Head
2008/04/28 Improved Turbocharger {1052, 1053}
C6.6 Marine Generator Set Safety Messages
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498} Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225} Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
C175-16 and C175-20 Generator Set Engines Lubrication System Operation
Air Conditioning and Heating R134a for All Caterpillar Machines Heater Performance - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Compressor Protection System - Test
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Disassembly and Assembly
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Testing and Adjusting
3512B Petroleum Engine Maintenance Recommendations
Air Conditioning and Heating R134a for All Caterpillar Machines Air Conditioning System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines Heating and Air Conditioning Service Publications
2012/10/04 Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0110 - FMI 09
C7 PETROLEUM Petroleum Engine Coolant Temperature Sensor - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0190 - FMI 08
Air Conditioning and Heating R134a for All Caterpillar Machines Troubleshooting Heating and Air Conditioning Control System
C7 PETROLEUM Petroleum Engine Engine Oil Pressure Sensor - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0248 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0262 - FMI 06
Air Conditioning and Heating R134a for All Caterpillar Machines In-Line Refrigerant Dryer - Remove and Install