C9.3B Engines Caterpillar


Cylinder Liner

Usage:

D6 B72


Illustration 1g01662374

Table 1
Item  Qty  Part  Specification Description 
Diameter is 128.95 ± 0.03 mm (5.077 ± 0.001 inch)
Diameter is 127 ± 0.3 mm (5 ± 0.01 inch)
Diameter is 128.85 ± 0.05 mm (5.073 ± 0.002 inch)
Diameter is 128.85 ± 0.05 mm (5.073 ± 0.002 inch)
Diameter is 128.15 ± 0.05 mm (5.045 ± 0.002 inch)
Diameter is 122.75 ± 0.2 mm (4.833 ± 0.008 inch)
Bore diameter for the cylinder liner 115.025 ± 0.025 mm (4.529 ± 0.001 inch)

Caterpillar Information System:

C9.3B Engines Electronic Unit Injector Wiring
C9.3B Engines Cylinder Block Cover Group
C9.3B Engines Gear Group (Front)
New Final Drive and Brake (Wheel) Group Now Used on AD45B Underground Articulated Trucks {4011} New Final Drive and Brake (Wheel) Group Now Used on AD45B Underground Articulated Trucks {4011}
D8T and D9T Track-Type Tractors Machine Movement
C9.3B Engines Engine Oil Lines
D8T and D9T Track-Type Tractors Torque Converter
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180} Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
3512E Oil Well Service Engine Engine Oil and Filter - Change
3512E Oil Well Service Engine Engine Oil Level - Check
3512E Oil Well Service Engine Engine Air Precleaner - Check/Clean
D6 Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108} An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108}
Incorrect Positioning of Magnet In Return to Dig System for Certain 910K Compact Wheel Loaders {5112} Incorrect Positioning of Magnet In Return to Dig System for Certain 910K Compact Wheel Loaders {5112}
C9.3B Engines Fuel Injection Pump - Pump Mounting
C9.3B Engines Camshaft
3512E Oil Well Service Engine Engine Oil Sample - Obtain
Installation of Platform and Railings on Certain D11T Track-Type Tractors {7150, 7253, 7254, 7256} Installation of Platform and Railings on Certain D11T Track-Type Tractors {7150, 7253, 7254, 7256}
Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620} Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620}
Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}
3512E Oil Well Service Engine Plate Locations and Film Locations
C9.3B Engines Front Housing and Covers
New Grease Injectors are Used for Certain MD6250 and MD6310 Rotary Drills {7540} New Grease Injectors are Used for Certain MD6250 and MD6310 Rotary Drills {7540}
D6 Track-Type Tractor Equalizer Bar Center Pin - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.