C9.3B Engines Caterpillar


Gear Group (Front)

Usage:

D6 B72


Illustration 1g06362240

Table 1
Item  Qty  Part  Specification Description 
6V-1820 Bolt  Torque to 60 ± 12 N·m (44 ± 9 lb ft)
6V-5843 Bolt  Torque to 70 ± 12 N·m (52 ± 9 lb ft)
200-4495 Idler Shaft  Diameter is 74.000 ± 0.013 mm (2.9134 ± 0.0005 inch).
Before assembly, lubricate the journal, bearing bore, and thrust face with clean engine oil. 
136-4183 Bolt  Torque to 70 ± 12 N·m (52 ± 9 lb ft)
296-5412 Idler Gear As  Before assembly, lubricate the journal, bearing bore, and thrust face with clean engine oil. 
Align the timing marks on the camshaft idler gear (2) with the holes on the camshaft gear (6) and the crankshaft gear (7). 

Caterpillar Information System:

New Final Drive and Brake (Wheel) Group Now Used on AD45B Underground Articulated Trucks {4011} New Final Drive and Brake (Wheel) Group Now Used on AD45B Underground Articulated Trucks {4011}
D8T and D9T Track-Type Tractors Machine Movement
C9.3B Engines Engine Oil Lines
D8T and D9T Track-Type Tractors Torque Converter
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180} Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
3512E Oil Well Service Engine Engine Oil and Filter - Change
3512E Oil Well Service Engine Engine Oil Level - Check
3512E Oil Well Service Engine Engine Air Precleaner - Check/Clean
D6 Track-Type Tractor Power Train Final Drive Planetary Carrier (In Chassis) - Remove and Install
C9.3B Engines Cylinder Head
3512E Oil Well Service Engine Fuel System Primary Filter/Water Separator - Drain
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Fuel System Primary Filter (Water Separator) - Drain
C9.3B Engines Cylinder Block Cover Group
C9.3B Engines Electronic Unit Injector Wiring
C9.3B Engines Cylinder Liner
An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108} An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108}
Incorrect Positioning of Magnet In Return to Dig System for Certain 910K Compact Wheel Loaders {5112} Incorrect Positioning of Magnet In Return to Dig System for Certain 910K Compact Wheel Loaders {5112}
C9.3B Engines Fuel Injection Pump - Pump Mounting
C9.3B Engines Camshaft
3512E Oil Well Service Engine Engine Oil Sample - Obtain
Installation of Platform and Railings on Certain D11T Track-Type Tractors {7150, 7253, 7254, 7256} Installation of Platform and Railings on Certain D11T Track-Type Tractors {7150, 7253, 7254, 7256}
Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620} Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620}
Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}
3512E Oil Well Service Engine Plate Locations and Film Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.