Water Pump - Install
Installation Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Check the O-ring seal from the water pump for damage or wear. If necessary, replace the O-ring seal.
Note: Refer to Disassembly and Assembly, "General Information (Reference Material)" for more information.
- Attach Tooling (A) and a suitable lifting device to water pump (3). The weight of water pump (3) is approximately 68 kg (150 lb). Install water pump (3) .
Show/hide table
Illustration 1 | g00544018 |
Show/hide table
Illustration 2 | g00544019 |
- Install bolts (5) that hold water pump (3) to the front housing.
- Install elbow (4), tube (7), and elbow (8) as a unit. Check the gaskets and the O-ring seal for wear or damage. If necessary, replace the gaskets.
- Install bolts (6) .
- Install bolts (2) .
- Connect water inlet connection (1) to water pump (3) .
- Fill the cooling system with coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Caterpillar Information System:
3608 Engine Water Pump - Remove
3608 Engine Cylinder Liner - Install
3176C, 3406E and 3456 Industrial Engines Component Location
G3520B Engine Prelube Pump - Inspect
C32 Marine Engine Cold Start Strategy
3176C, 3406E and 3456 Industrial Engines System Overview
C4.4 Industrial Engine Exhaust Manifold - Inspect
G3520B Engine Product Lifting
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Engine Rating Definitions
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Gauges and Indicators
3508B, 3508C, 3512B, 3512C, 3516B and and 3516C Marine Engines Gauges and Indicators
2007/11/05 Replacement of the Priming Pump {1258}
2008/11/01 New Lines and Clamps are Now Used for the Air Control Group {1087, 7554}
3608 Engine Auxiliary Water Pump - Assemble
3608 Engine Water Pump Seal - Remove
3608 Engine Water Pump Seal - Install
3608 Engine Fuel Pressure Control Valve - Assemble
3608 Engine Fuel Pressure Control Valve - Install
3608 Engine Prelubrication Oil Pump - Remove
3608 Engine Prelubrication Oil Pump - Install
3608 Engine Camshaft Bearings - Install
3176C, 3406E and 3456 Industrial Engines Indicator Lamps
C32 Marine Generator Set Engine Oil and Filter - Change
3176C, 3406E and 3456 Industrial Engines Engine Monitoring System