Axle Oil Cooler - Remove and Install
Start by:
a. Remove crankcase guard.
b. Release system hydraulic pressure.
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose assemblies (1) and (2).
- Use two people to remove axle oil cooler group (4). The weight of axle oil cooler group (4) is approximately
40 kg (88 lb) . Remove bolts (3) and axle oil cooler group (4).Show/hide table
Illustration 2 g06016203 - Disconnect tube assemblies (6).
- Remove bolts (5) and axle oil cooler (7).
Show/hide table
| |
| Illustration 1 | g06016154 |
- Install axle oil cooler (7) in the reverse order of removal.
Caterpillar Information System:
990K Wheel Loader and 844K Wheel Dozer Machine Systems Bucket - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Bottom Guards (Front) - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Crankcase Guard - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
963K Track-Type Loader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Remove and Install
D11T Multishank and Single Shank Ripper Installation {6310} D11T Multishank and Single Shank Ripper Installation {6310}
D9R Cab Installation {1408, 7177, 7301, 7325} D9R Cab Installation {1408, 7177, 7301, 7325}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Remove
Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513} Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}
320GC, 320 and 323 Excavators Machine Systems Duo-Cone Conventional Seals - Install
Improved Brackets Are Used on Tilt Cylinder Guard for Certain K-Series and M-Series Medium Wheel Loaders {5104, 7150, 7164} Improved Brackets Are Used on Tilt Cylinder Guard for Certain K-Series and M-Series Medium Wheel Loaders {5104, 7150, 7164}
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157} A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A New Water Valve Is Used with the Cabs Air Conditioner on Certain Medium Wheel Loaders, Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320} A New Water Valve Is Used with the Cabs Air Conditioner on Certain Medium Wheel Loaders, Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320}
An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051} An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}
844K Wheel Dozer and 990K Wheel Loader Power Train Gear Pump (Axle Oil Cooler) - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
963K Track-Type Loader Machine Systems Piston Pump (Implement) - Remove and Install
An Improved Oil Cooler Drain Hose Routing Is Now Available On 963K Track-Type Loader {1380, 1386, 5057} An Improved Oil Cooler Drain Hose Routing Is Now Available On 963K Track-Type Loader {1380, 1386, 5057}
A New Water Valve Is Used with the Cabs Air Conditioner on Certain Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320} A New Water Valve Is Used with the Cabs Air Conditioner on Certain Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320}
Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920} Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920}
910K, 914K and 920K Compact Wheel Loaders Battery - Clean
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Install
963K Track-Type Loader Machine Systems Electronic Control Module - Remove and Install