Bottom Guards (Front) - Remove and Install
- Use two people or a suitable jack to remove bottom guard (2). The weight of bottom guard (2) is approximately
28 kg (62 lb) . Remove bolts (1) and bottom guard (2).
Show/hide table
Illustration 1 | g06018277 |
- Install bottom guard (2) in the reverse order of removal.
Caterpillar Information System:
990K Wheel Loader and 844K Wheel Dozer Machine Systems Brake Control Valve (Service) - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Crankcase Guard - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Machine Systems Brake Control Valve (Parking) - Remove and Install
963K Track-Type Loader Machine Systems Fan and Gear Motor (Hydraulic Fan) - Remove and Install
D11T Multishank and Single Shank Ripper Installation {6310} D11T Multishank and Single Shank Ripper Installation {6310}
D9R Cab Installation {1408, 7177, 7301, 7325} D9R Cab Installation {1408, 7177, 7301, 7325}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Crankshaft - Remove
Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513} Improved Positive Pin Retention (PPR) & Positive Pin Retention 2 (PPR2) Tooling {0700, 6108, 6501, 6502, 6513}
320GC, 320 and 323 Excavators Machine Systems Duo-Cone Conventional Seals - Install
Improved Brackets Are Used on Tilt Cylinder Guard for Certain K-Series and M-Series Medium Wheel Loaders {5104, 7150, 7164} Improved Brackets Are Used on Tilt Cylinder Guard for Certain K-Series and M-Series Medium Wheel Loaders {5104, 7150, 7164}
910K, 914K and 920K Compact Wheel Loaders Bucket Tips - Inspect/Replace
990K Wheel Loader and 844K Wheel Dozer Machine Systems Brake Accumulator - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Machine Systems Bucket - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Axle Oil Cooler - Remove and Install
A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157} A Special Instruction Must be Followed when Installing Retaining-Rings on ELRT Control Valves {3030, 3083, 3157}
A New Water Valve Is Used with the Cabs Air Conditioner on Certain Medium Wheel Loaders, Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320} A New Water Valve Is Used with the Cabs Air Conditioner on Certain Medium Wheel Loaders, Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320}
An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051} An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}
844K Wheel Dozer and 990K Wheel Loader Power Train Gear Pump (Axle Oil Cooler) - Remove and Install
844K Wheel Dozer and 990K Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
963K Track-Type Loader Machine Systems Piston Pump (Implement) - Remove and Install
An Improved Oil Cooler Drain Hose Routing Is Now Available On 963K Track-Type Loader {1380, 1386, 5057} An Improved Oil Cooler Drain Hose Routing Is Now Available On 963K Track-Type Loader {1380, 1386, 5057}
A New Water Valve Is Used with the Cabs Air Conditioner on Certain Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320} A New Water Valve Is Used with the Cabs Air Conditioner on Certain Large Wheel Loaders Wheel Dozers, Soil Compactors, and Landfill Compactors {7320}
Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920} Troubleshooting -7 Fuel Injector Not Responding Faults Excessively on Certain C9.3 Tier 4 Final {1290, 1920}
910K, 914K and 920K Compact Wheel Loaders Battery - Clean