Lifter Group
Show/hide table
图 1 | g01446322 |
注: 组装前,将清洁的发动机机油或 8T-2998 润滑剂 涂抹在挺杆镶圈和挺杆轴组件上。
(1) 8 只螺栓的扭矩 ... 55 ± 10 N·m (41 ± 7 lb ft)
Show/hide table
图 2 | g01561546 |
(2) 两个螺栓的扭矩 ... 55 ± 10 N·m (41 ± 7 lb ft)
Show/hide table
图 3 | g01561595 |
(A) 至空心定位销的高度 ... 8.0 ± 0.5 mm (0.31 ± 0.02 in)
(A) 至空心定位销的高度 ... 7.5 ± 1.0 mm (0.30 ± 0.04 in)
Caterpillar Information System:
C9 On-highway Engine Engine to Transmission Adapter
Inspection and Testing of the Air Shutoff{1078} Inspection and Testing of the Air Shutoff{1078}
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
C4.4 Industrial Engine Piston Height - Inspect
2006/07/03 Change to the Design of the Wiring Harness {1408, 7422}
568 Forest Machine Machine System Specifications Front Idler
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering) - Manual
3606 and 3608 Engines Engine Lifting Bracket - Remove and Install
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
C32 Power Module Engine Valve Lash - Inspect/Adjust
390F Excavator Machine Systems Travel Motor - Disassemble
C175-16 Locomotive Engine Engine Speed Sensor
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Keyswitch/EMO Panel
C9 Engines for Caterpillar Built Machines Engine Design
390F Excavator Machine Systems Travel Motor - Assemble
3500B Industrial Engine Refill Capacities and Recommendations
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys APS Controller PWA
3606 and 3608 Engines Engine Support - Remove and Install
C9 On-highway Engine Exhaust Combustion Group - Aftertreatment Regeneration Device
C6.6 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C280-12 and C280–16 Marine Engines Mounting Isolator - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Disconnect Switch Handle
2006/11/27 The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
C175-16 and C175-20 Generator Set Engines Fan Drive