Engine to Transmission Adapter
Show/hide table
Illustration 1 | g01283276 |
(1) Adapter
(2) Tighten the bolts to the following torque. ... 300 ± 40 N·m (220 ± 30 lb ft)
Caterpillar Information System:
Inspection and Testing of the Air Shutoff{1078} Inspection and Testing of the Air Shutoff{1078}
2006/08/14 New Procedure for Measuring the Connecting Rod {1218, 1225}
C4.4 Industrial Engine Piston Height - Inspect
2006/07/03 Change to the Design of the Wiring Harness {1408, 7422}
568 Forest Machine Machine System Specifications Front Idler
349F and 352F Excavators Machine System Specifications Control Valve (Boom Lowering) - Manual
3606 and 3608 Engines Engine Lifting Bracket - Remove and Install
C6.6 Engines for Caterpillar Built Machines Fuel Priming Pump
C32 Power Module Engine Valve Lash - Inspect/Adjust
390F Excavator Machine Systems Travel Motor - Disassemble
C175-16 Locomotive Engine Engine Speed Sensor
2006/07/03 A New Speed-Timing Sensor is Available {1912}
C175-16 Engine for 795F Series AC Off-Highway Trucks Lifter Group
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Keyswitch/EMO Panel
C9 Engines for Caterpillar Built Machines Engine Design
390F Excavator Machine Systems Travel Motor - Assemble
3500B Industrial Engine Refill Capacities and Recommendations
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys APS Controller PWA
3606 and 3608 Engines Engine Support - Remove and Install
C9 On-highway Engine Exhaust Combustion Group - Aftertreatment Regeneration Device
C6.6 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C280-12 and C280–16 Marine Engines Mounting Isolator - Remove and Install
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys DC Disconnect Switch Handle
2006/11/27 The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}