C9 Generator Set Engines Caterpillar


Diagnostic Code Cross Reference

Usage:

C9 C9E
Problems with the electronic control system are reported via the following different types of codes: SPN/FMI codes, diagnostic codes and event codes.

For information on SPN/FMI codes, refer to troubleshooting with a diagnostic code Troubleshooting, "Diagnostic Codes".

For information on diagnostic codes, refer to troubleshooting with a diagnostic code Troubleshooting, "Diagnostic Codes".

For information on event codes, refer to troubleshooting with an event code Troubleshooting, "Event Codes".

Portions of this material are reprinted with permission from SAE J1939DA_201607© 2016 SAE International, SAE International is not responsible for any use or translation of this material, in whole or in part. Please contact SAE International to obtain a complete copy of SAE J1939DA_201607, the official definitive source of this standard.

Cross-Reference for SPN-FMI Code to CID-FMI

Table 1
Cross-Reference for SPN-FMI Code to CID-FMI (Diagnostics) 
SPN/FMI Code  CID-FMI or EID  Description of Code 
651-05  1-05  Cylinder #1 Injector : Current Below Normal 
651-06  1-06  Cylinder #1 Injector : Current Above Normal 
652-05  2-05  Cylinder #2 Injector : Current Below Normal 
652-06  2-06  Cylinder #2 Injector : Current Above Normal 
653-05  3-05  Cylinder #3 Injector : Current Below Normal 
653-06  3-06  Cylinder #3 Injector : Current Above Normal 
654-05  4-05  Cylinder #4 Injector : Current Below Normal 
654-06  4-06  Cylinder #4 Injector : Current Above Normal 
655-05  5-05  Cylinder #5 Injector : Current Below Normal 
655-06  5-06  Cylinder #5 Injector : Current Above Normal 
656-05  6-05  Cylinder #6 Injector : Current Below Normal 
656-06  6-06  Cylinder #6 Injector : Current Above Normal 
678-03  41-3  8 Volt DC Supply : Voltage Above Normal 
678-04  41-4  8 Volt DC Supply : Voltage Below Normal 
679-05  42-05  Injector Actuation Valve open circuit 
679-06  42-06  Injector Actuation Valve short 
91-08  91-08  Throttle Position Sensor : Abnormal Frequency, Pulse Width, Or Period 
94-03  94-03  Fuel Delivery Pressure Sensor: Voltage Above Normal 
94-04  94-04  Fuel Delivery Pressure Sensor : Voltage Below Normal 
100-03  100-03  Engine Oil Pressure Sensor : Voltage Above Normal 
100-04  100-04  Engine Oil Pressure Sensor : Voltage Below Normal 
100-10  100-10  Engine Oil Pressure Sensor : Abnormal Rate of Change 
110-03  110-03  Engine Coolant Temperature Sensor : Voltage Above Normal 
110-04  110-04  Engine Coolant Temperature Sensor : Voltage Below Normal 
164-03  164-03  Injector Actuation Pressure voltage high 
164-04  164-04  Injector Actuation Pressure voltage low 
168-00  168-00  Electrical System Voltage : High, Most Severe (3) 
168-01  168-01  Electrical System Voltage : Low, Most Severe (3) 
168-02  168-02  Electrical System Voltage : Erratic, Intermittent, or Incorrect 
105-03  172-03  Intake Manifold Air Temperature Sensor : Voltage Above Normal 
105-04  172-04  Intake Manifold Air Temperature Sensor : Voltage Below Normal 
174-03  174-03  Fuel Temperature Sensor : Voltage Above Normal 
174-04  174-04  Fuel Temperature Sensor : Voltage Below Normal 
190-08  190-08  Engine Speed Sensor : Abnormal Frequency, Pulse Width, or Period 
639-09  247-09  J1939 Data Link communications 
234-02  253-02  Personality Module : Erratic Intermittent or Incorrect 
228-11  261-11  Engine Timing Offset fault 
228-13  261-13  Engine Timing Calibration : Out Of Calibration 
620-03  262-03  5 Volt Sensor DC Power Supply : Voltage Above Normal 
620-04  262-04  5 Volt Sensor DC Power Supply : Voltage Below Normal 
1111-02  268-02  Programmed Parameter Fault : Erratic, Intermittent, or Incorrect 
1080-03  269-03  Sensor Power Supply : Voltage Above Normal 
1080-04  269-04  Sensor Power Supply : Voltage Below Normal 
108-03  274-03  Atmospheric Pressure Sensor : Voltage Above Normal 
108-04  274-04  Atmospheric Pressure Sensor : Voltage Below Normal 
723-08  342-08  Secondary Engine Speed Sensor : Abnormal Frequency, Pulse Width, or Period 
526-05  526-05  Turbo Wastegate Drive : Current Below Normal 
526-06  526-06  Turbo Wastegate Drive : Current Above Normal 
544-03  544-03  Engine Cooling Fan Speed Sensor : Voltage Above Normal 
544-08  544-08  Engine Cooling Fan Speed Sensor : Voltage Below Normal 
N/A  1690-08  Throttle #2 Position Sensor : Abnormal Frequency, Pulse Width, or Period 
102-03  1785-03  Intake Manifold Pressure Sensor : Voltage Above Normal 
102-04  1785-04  Intake Manifold Pressure Sensor : Voltage Below Normal 
102-10  1785-10  Intake Manifold Pressure Sensor : Abnormal Rate of Change 

Cross-Reference for SPN-FMI Code to EID

Table 2
Cross-Reference for SPN-FMI Code to EID 
SPN/FMI  EID  Description of Code 
1237-01  E085-1  Engine Shutdown Overridden 
94-15  E096-1  High Fuel Pressure Warning 
94-16  E096-2  High Fuel Pressure Derate 
94-00  E096-3  High Fuel Pressure Shutdown 
173-15  E194-2  High Exhaust Temperature Warning 
175-15  E197-1  High Engine Oil Temperature Warning 
175-16  E197-2  High Engine Oil Temperature 
175-0  E197-3  High Engine Oil Temperature Shutdown 
5580-17  E198-1  Low Fuel Pressure Warning 
5580-18  E198-2  Low Fuel Pressure Warning 
5580-0  E198-3  Low Fuel Pressure Warning 
110-17  E199-1  Low Engine Coolant Temperature Warning 
N/A  E255-1  Diagnostic Reset 
N/A  E264-3  E-Stop shutdown 
100-17  E360-1  Low Engine Oil Pressure Warning 
100-01  E360-3  Low Engine Oil Pressure Shutdown 
110-15  E361-1  High Engine Coolant Temperature Warning 
110-16  E361-2  High Engine Coolant Temperature Derate 
110-00  E361-3  High Engine Coolant Temperature Shutdown 
190-15  E362-1  Engine Overspeed Warning 
190-00  E362-3  Engine Overspeed Shutdown 
174-15  E363-1  High Fuel Supply Temperature Warning 
174-16  E363-2  High Fuel Supply Temperature Derate 
174-00  E363-3  High Fuel Temperature Shutdown 
16-17  E390-1  Fuel Filter Restriction Warning 
16-18  E390-2  Fuel Filter Restriction Derate 
16-01  E390-3  Fuel Filter Restriction Shutdown 
1636-15  E539-1  High Intake Manifold Air Temperature Warning 
1636-16  E539-2  High Intake Manifold Air Temperature Derate 
N/A  E662-1  High Engine Cooling Fan Speed 
N/A  E662-3  High Engine Cooling Fan Speed 

Caterpillar Information System:

Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101} Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101}
C32 Petroleum Engines Cylinder Head - Remove
C27 and C32 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Install
C27 and C32 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
3412 Generator Set Engines Fuel Shutoff Solenoid
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Assemble
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C32 Petroleum Engines Valve Mechanism Cover - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
C175 Generator Set Engines Vibration Damper - Remove and Install
C27 and C32 Generator Set Engines Coolant Level Sensor Circuit - Test
3500 Marine Engines Pistons, Rings and Connecting Rods
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
2005/10/03 A New Retaining Plate and Bolts for the Bushing on the Engine Idler Gear are Now Available {1151, 1210, 1234}
C9 Generator Set Engines System Configuration Parameters
2005/09/26 New Turbocharger Water Lines are now Used {1380}
C4.4 and C6.6 Engines Event Codes
C9 Marine Engines System Overview
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Track - Separate - Non-PPR2
C27 and C32 Engines General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.