Auxiliary Pilot Valve (Straight Travel) - Install
安装步骤
- 安装辅助先导阀 (7) 。
Show/hide table
 | |
| 图 1 | g01204642 |
- 安装螺栓 (6) 。
Show/hide table
 | |
| 图 2 | g01204531 |
- 安装踏板 (4) 和螺栓 (5) 。
Show/hide table
 | |
| 图 3 | g01204628 |
- 将接头 (3) 安装在阀中。
Show/hide table
 | |
| 图 4 | g01204620 |
- 连接软管组件 (2) 。
Show/hide table
 | |
| 图 5 | g01204608 |
- 安装薄板组件 (1) 。
Show/hide table
 | |
| 图 6 | g01204565 |
Caterpillar Information System:
C27 and C32 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
3412 Generator Set Engines Fuel Shutoff Solenoid
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Assemble
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C32 Petroleum Engines Valve Mechanism Cover - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Upper
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C27 and C32 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C32 Petroleum Engines Cylinder Head - Remove
Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101} Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101}
C9 Generator Set Engines Diagnostic Code Cross Reference
C175 Generator Set Engines Vibration Damper - Remove and Install
C27 and C32 Generator Set Engines Coolant Level Sensor Circuit - Test
3500 Marine Engines Pistons, Rings and Connecting Rods
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
2005/10/03 A New Retaining Plate and Bolts for the Bushing on the Engine Idler Gear are Now Available {1151, 1210, 1234}
C9 Generator Set Engines System Configuration Parameters
2005/09/26 New Turbocharger Water Lines are now Used {1380}