Fuel Shutoff Solenoid
Show/hide table
Illustration 1 | g00371932 |
Note: The solenoid is energized in order to shut down.
(1) Solenoid plunger
(2) Stop bolt
(3) Locknut
(4) Wire
Coil resistance at 25 °C (77 °F)
- Pull-in coil ... 0.560 ± .056 ohms
- Hold-in coil ... 21.5 ± 2.2 ohms
Caterpillar Information System:
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201} Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Assemble
C1.5 and C2.2 Generator Set Engines Radiator - Remove and Install
3508 EUI Engine for D11N and D11R Track-Type Tractors Installation and Removal of the Speed/Timing Sensor
C32 Petroleum Engines Valve Mechanism Cover - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Valve Lifter - Disassemble
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Assemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Upper
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Boom - Install
C27 and C32 Generator Set Engines 5 Volt Engine Pressure Sensor Supply Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Disassemble
C32 Petroleum Engines Housing (Front) - Install
C27 and C32 Generator Set Engines Engine Pressure Sensor Open or Short Circuit - Test
315D, 318D and 319D Excavators Machine Systems Auxiliary Pilot Valve (Straight Travel) - Install
C27 and C32 Generator Set Engines Engine Temperature Sensor Open or Short Circuit - Test
C32 Petroleum Engines Cylinder Head - Remove
Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101} Bench Test Procedure for TH48FT - E80 Oil Field Transmission{3030, 3073, 3101}
C9 Generator Set Engines Diagnostic Code Cross Reference
C175 Generator Set Engines Vibration Damper - Remove and Install
C27 and C32 Generator Set Engines Coolant Level Sensor Circuit - Test
3500 Marine Engines Pistons, Rings and Connecting Rods
2005/09/26 A New Fuel Lift Pump is Now Available {1256, 1258}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Disassemble
2005/10/03 A New Retaining Plate and Bolts for the Bushing on the Engine Idler Gear are Now Available {1151, 1210, 1234}