Engine Oil Filter Base - Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Install bracket (24) with spacers, washers, and nuts (23).
Show/hide table
Illustration 2 g00819333 - Place elbow (22) in position.
- Install bolts (21).
- Install washers and bolts (20).
- Tighten clamp (19).
Show/hide table
Illustration 3 g00819330 - Install bracket (18) with washers and bolts (17).
- Install washers and bolts (16).
Show/hide table
Illustration 4 g00819281 - Place rod (14) in position.
- Tighten bolt (13).
- Install the spacer, the washer, and bolt (15).
- Adjust the tension on the V-Belt. Refer to Disassembly and Assembly, "Air conditioner belt - Remove and Install".
Show/hide table
Illustration 5 g00819280 - Install elbow (12) with washers and bolts (11).
Show/hide table
Illustration 6 g00819269 - Install retainers (9) with washers and bolts (10).
Show/hide table
Illustration 7 g00819382 - Install bracket (8) and base assembly (8A) with washers and bolts (7).
Show/hide table
Illustration 8 g00819256 - Install washers and bolts (6).
Show/hide table
Illustration 9 g00819219 - Install washers and bolts (5).
Show/hide table
Illustration 10 g00819153 - Install oil pan plate (2) with bolts (3).
- Install new cable ties (4).
Show/hide table
Illustration 11 g00819146 - Install oil filter (1).
Show/hide table
| |
| Illustration 1 | g00819337 |
End By:
- Refill the cooling system coolant. The capacity of the cooling system is approximately
132 L (35 US gal) . Refer to Operation and Maintenance Manual, SEBU7244, "Cooling System (DEAC) Coolant - Change".
Caterpillar Information System:
953C Track-Type Loader Hydraulic System Visual Inspection
D10R Track-Type Tractor Power Train Torque Converter Outlet Relief Valve - Assemble
D10R Track-Type Tractor Power Train Torque Converter Outlet Relief Valve - Disassemble
826G Series II Landfill Compactor, 825G Series II Soil Compactor and 824G Series II Wheel Dozer Transmission Pressures - Test and Adjust
3046 Engine for Caterpillar Built Machines Electric Starting System - Test
2001/10/01 Improved Support for the Air Conditioner Compressor {7320}
3046 Engine for Caterpillar Built Machines Cooling System - Test
2001/08/20 Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
D7R Track-Type Tractor Machine Systems Ripper Frame - Remove and Install
D7R Series II Track-Type Tractor Engine Supplement Water Pump - Remove
D7R Series II Track-Type Tractor Engine Supplement Primary Fuel Filter and Base - Remove and Install
631G and 637G Wheel Tractor-Scrapers Machine Systems Gear Pump (Hydraulic and Steering) - Install
385B Excavator Windows - Clean
2001/08/27 Special Instruction, REHS0719, "Procedure to Update the Pilot Valve on a Wheel Tractor-Scraper" is Available {5059}
Replacing The Temperature Control Cable On 953C, 963C, and 973C Track-Type Loaders{7337} Replacing The Temperature Control Cable On 953C, 963C, and 973C Track-Type Loaders{7337}
3306B Engine Supplement for 637G Wheel Scraper Hood - Remove and Install
HDB Series and M1 Series Heavy Duty Brushless Alternators Regulator - Test
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Braking System General Information (Braking)
966G Series II Wheel Loader and 972G Series II Wheel Loader Braking System General Information (Braking)
3306B Engine Supplement for 637G Wheel Scraper Electric Starting Motor - Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Relief Valve (Main)
3064 and 3066 Engines for Caterpillar Built Machines Air Inlet Heater
D7R Series II Track-Type Tractor Hydraulic System Ripper Tip Control Valve
3306B Engine Supplement for 637G Wheel Scraper Oil Pan - Remove and Install