Ripper Tip and Shank Protector - Inspect/Replace
When the ripper tip is worn close to the shank, replace the ripper tip. If the tip is too blunt, the tip will not penetrate properly.
- Raise the ripper. Place blocking under the ripper. Lower the ripper onto the blocking. The ripper should be high enough so that the ripper tip can be removed. Do not place the ripper too high.
- If the ripper tip is worn, drive out the pin. Remove the tip and the shank pin retainer.
- Clean the shank pin retainer and the pin.
- Install the new tip and the retainer.
- Install the pin from the opposite side of the retainer.
- Raise the ripper and remove the blocking.
- Lower the ripper to the ground.
Caterpillar Information System:
963C Track-Type Loader Radiator Core - Clean
953C Track-Type Loader Stopping the Engine if an Electrical Malfunction Occurs
973C Track-Type Loader Hydrostatic Drive Operating Principle
953C Track-Type Loader Seat Belt - Inspect
973 Track-Type Loader Parking Brake Control
973 Track-Type Loader Seat Belt
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Transfer Pump - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System General Information (Steering) - HMU Steering
844 Wheel Dozer Cooling System Water Temperature Regulator - Replace
963C Track-Type Loader Seat Adjustment and Seat Belt Inspection
844 Wheel Dozer Differential and Final Drive Oil - Change
D6F SR, D6G and D6G SR Track-Type Tractors Safety Signs and Labels
844 Wheel Dozer Cooling System Coolant (ELC) - Change
844 Wheel Dozer Cooling System Coolant Extender (ELC) - Add
G3300 Engines Ignition System Transformer Resistance - Test
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Radiator Shroud - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Radiator Shroud - Install
627F Wheel Tractor-Scraper Differential Lock Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Hydraulic System - Electrohydraulic System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Hydraulic System - Pilot Hydraulic System
994D Wheel Loader Power Train Torque Converter Outlet Relief Valve
Installation of the D11R Carrydozer (S/N:: 5JP; 9NP) Bulldozer{6088} Installation of the D11R Carrydozer (S/N:: 5JP; 9NP) Bulldozer{6088}
621F Wheel Tractor-Scraper Steering Control