Stopping the Engine if an Electrical Malfunction Occurs
Show/hide table
Illustration 1 | g00275359 |
The Shutoff Solenoid Group is located on the governor. |
If turning the engine off/on/start switch to the OFF position does not stop the engine, perform the following procedure.
- Open the rear engine compartment access door on the right side of the machine and locate the fuel shutoff solenoid.
- Push the end of the fuel shutoff solenoid inward in order to stop the engine.
Note: Do not operate the machine again until the malfunction has been corrected.
Caterpillar Information System:
973C Track-Type Loader Hydrostatic Drive Operating Principle
953C Track-Type Loader Seat Belt - Inspect
973 Track-Type Loader Parking Brake Control
973 Track-Type Loader Seat Belt
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Transfer Pump - Remove and Install
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Steering System General Information (Steering) - HMU Steering
844 Wheel Dozer Cooling System Water Temperature Regulator - Replace
963C Track-Type Loader Seat Adjustment and Seat Belt Inspection
844 Wheel Dozer Differential and Final Drive Oil - Change
D6F SR, D6G and D6G SR Track-Type Tractors Safety Signs and Labels
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Heater - Remove and Install
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Fuel Priming Pump and Fuel Filter Base - Remove and Install
963C Track-Type Loader Radiator Core - Clean
953C Track-Type Loader Ripper Tip and Shank Protector - Inspect/Replace
844 Wheel Dozer Cooling System Coolant (ELC) - Change
844 Wheel Dozer Cooling System Coolant Extender (ELC) - Add
G3300 Engines Ignition System Transformer Resistance - Test
3306C Engines for Caterpillar Built Machines Fuel Injection Pump
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Radiator Shroud - Remove
854G Wheel Tractor and 992G Wheel Loader Engine Supplement Radiator Shroud - Install
627F Wheel Tractor-Scraper Differential Lock Control
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Hydraulic System - Electrohydraulic System
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Main Hydraulic System - Pilot Hydraulic System
994D Wheel Loader Power Train Torque Converter Outlet Relief Valve