Use FT1614 Cover To Protect Center Shaft Assembly{0622,3305,3306,3302,3307}
Usage:
7251 And 7261 Marine Transmissions
The FT1614 Cover can be fabricated to protect the 2N3469 Center Shaft Assembly during removal of the top shaft assembly from 7251 and 7261 Marine Transmissions. See the illustration. It is possible for the center shaft assembly to become bent or damaged when the top shaft assembly is installed or removed.
To install the FT1614 Cover, remove the 4L4296 Retainer, then fasten the FT1614 Cover to the transmission in place of the retainer. Leave the cover in place until the top shaft and transmission cover is completely installed.
Drawing for the FT1614 Cover are available from your Division Service Manager.
The FT1614 Cover.
Caterpillar Information System:
1982/03/22 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22 Caterpillar Electric Starting Motors{1453,1407}
1982/03/22 Use 5P5195 Fuel Line Wrench Correctly{0612,1252}
1982/03/22 Improved Valve Cover Seal Used{1107}
1982/03/22 Engine Replacement{1000}
1982/03/22 Use Correct Torque On Hydraulic Valve Bolts, Nuts And Taperlock Studs{5050}
1982/03/22 Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/15 New Oil Pump Outlet Elbow Is Stronger{3314,3310}
1982/03/15 Use The 6V6059 Microlite With The 6V2196 Inspection Microscope{0651}
1982/03/15 New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15 More Flexible Hose For Use With Hydraulic Flowmeter{0651,5050}
1982/03/08 Correct Lubrication Procedure Will Prevent Damage To Fan Drive{1359,0374,0375}
1982/03/22 Improved Plunger And New Spring Used In Mechanical Shutoff Group{7418}
1982/03/29 Parts Book Changes{0374}
1982/03/29 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication{7453}
1982/03/29 Flywheel Adapters For Dynamometer Testing{1156,0652}
1982/03/29 Multi-Piece Wheel Rims; Caution Must Be Used{4202,4201}
1982/03/29 New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling{1355}
1982/03/29 Twisted Port Plate Can Cause Excessive Case Drain From Piston Pump Or Motor{5058,5070}
1982/04/05 Lubricant Recommendations Have Been Changed For Vehicular Products{0680,0374,0375,3004,1318,5060}
1982/04/05 Conversion Of 49-State 3406 Truck Engine From 283 kW (380 hp) To 298 kW (400 hp) Arrangements{1000}
1982/04/05 Reminder: Check Valve Lash Adjustment At Correct Intervals{1102}
1982/04/12 Pressure Regulator Group Now Available For Parts Service{3152,3185,3166,3012}
1982/04/12 Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}