Use 5P5195 Fuel Line Wrench Correctly{0612,1252}
Usage:
The 5P5195 Fuel Line Wrench is used to tighten the nuts on some fuel lines. It is possible to damage the crowfoot end of the wrench if it is not used correctly. The wrench can be damaged if a torque value of more than approximately 40 N·m (30 lb ft) is used.
Caterpillar Information System:
1982/03/22 Improved Valve Cover Seal Used{1107}
1982/03/22 Engine Replacement{1000}
1982/03/22 Use Correct Torque On Hydraulic Valve Bolts, Nuts And Taperlock Studs{5050}
1982/03/22 Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/15 New Oil Pump Outlet Elbow Is Stronger{3314,3310}
1982/03/15 Use The 6V6059 Microlite With The 6V2196 Inspection Microscope{0651}
1982/03/15 New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15 More Flexible Hose For Use With Hydraulic Flowmeter{0651,5050}
1982/03/08 Correct Lubrication Procedure Will Prevent Damage To Fan Drive{1359,0374,0375}
1982/03/08 New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08 Heavy Duty Air Cleaner Available, With Precleaner And Automatic Dust Ejector{1051,1055,1061,1062}
1982/03/08 Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/22 Caterpillar Electric Starting Motors{1453,1407}
1982/03/22 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22 Use FT1614 Cover To Protect Center Shaft Assembly{0622,3305,3306,3302,3307}
1982/03/22 Improved Plunger And New Spring Used In Mechanical Shutoff Group{7418}
1982/03/29 Parts Book Changes{0374}
1982/03/29 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication{7453}
1982/03/29 Flywheel Adapters For Dynamometer Testing{1156,0652}
1982/03/29 Multi-Piece Wheel Rims; Caution Must Be Used{4202,4201}
1982/03/29 New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling{1355}
1982/03/29 Twisted Port Plate Can Cause Excessive Case Drain From Piston Pump Or Motor{5058,5070}
1982/04/05 Lubricant Recommendations Have Been Changed For Vehicular Products{0680,0374,0375,3004,1318,5060}
1982/04/05 Conversion Of 49-State 3406 Truck Engine From 283 kW (380 hp) To 298 kW (400 hp) Arrangements{1000}