Flywheel Adapters For Dynamometer Testing{1156,0652}
Usage:
943, 953 Track Type Loaders, 215 Excavators, 3512 Engines
New FT1615 and FT1617 Adapters are available for Dynamometer testing. The FT1617 Adapter is used on 943 and 953 Track-Type Loaders and the 215 Excavator. The FT1615 Adapter is used on the 3512 Engines.
Drawings for both of these adapters are available from your Division Service Manager.
Tool charts in the Tool Guide, Engine Tools, Section 5, Group 9, have a list of adapters needed for Dynamometer testing. The new adapters will be included in these charts when the next revision is made to the Tool Guide.
Caterpillar Information System:
1982/03/29 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication{7453}
1982/03/29 Parts Book Changes{0374}
1982/03/22 Improved Plunger And New Spring Used In Mechanical Shutoff Group{7418}
1982/03/22 Use FT1614 Cover To Protect Center Shaft Assembly{0622,3305,3306,3302,3307}
1982/03/22 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22 Caterpillar Electric Starting Motors{1453,1407}
1982/03/22 Use 5P5195 Fuel Line Wrench Correctly{0612,1252}
1982/03/22 Improved Valve Cover Seal Used{1107}
1982/03/22 Engine Replacement{1000}
1982/03/22 Use Correct Torque On Hydraulic Valve Bolts, Nuts And Taperlock Studs{5050}
1982/03/22 Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/15 New Oil Pump Outlet Elbow Is Stronger{3314,3310}
1982/03/29 Multi-Piece Wheel Rims; Caution Must Be Used{4202,4201}
1982/03/29 New Regulator Group Increases Coolant Flow To Cab Heater, Prevents Overcooling{1355}
1982/03/29 Twisted Port Plate Can Cause Excessive Case Drain From Piston Pump Or Motor{5058,5070}
1982/04/05 Lubricant Recommendations Have Been Changed For Vehicular Products{0680,0374,0375,3004,1318,5060}
1982/04/05 Conversion Of 49-State 3406 Truck Engine From 283 kW (380 hp) To 298 kW (400 hp) Arrangements{1000}
1982/04/05 Reminder: Check Valve Lash Adjustment At Correct Intervals{1102}
1982/04/12 Pressure Regulator Group Now Available For Parts Service{3152,3185,3166,3012}
1982/04/12 Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12 Lock Screw For Threaded Crown On Hydraulic Cylinders No Longer Used{5000}
1982/04/12 Make Sure Hydraulic Pumps Are Installed Correctly{5055,5070,5073}
1982/04/12 New Seals Improve Pressure Regulator Group{3185,3012}
1982/04/12 Use Correct Size Bolt To Install 5P9736, 6V2156 Or 6V2157 Link Brackets{0644}