1982/03/15 Caterpillar


Use The 6V6059 Microlite With The 6V2196 Inspection Microscope{0651}

Usage:


The 6V6059 Microlite is available for use with the 6V2196 Inspection Microscope. The microlite gives you a light source when there is not enough light in the area to use the microscope. A clip is included to attach the light to the microscope.

The microlite uses a standard 222 bulb (2.25 volt - 0.25 amp) with a screw type base and focus lens. Replacement lights are available from most electric suppliers.

The microlite will use two standard "AAA" size batteries. The batteries are not included. Because of their longer service life, use "AAA" alkaline 1.5 volt batteries in the microlite. Several of these batteries are shown in the chart.


Use of 6V6059 Microlite

Caterpillar Information System:

1982/03/15 New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15 More Flexible Hose For Use With Hydraulic Flowmeter{0651,5050}
1982/03/08 Correct Lubrication Procedure Will Prevent Damage To Fan Drive{1359,0374,0375}
1982/03/08 New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08 Heavy Duty Air Cleaner Available, With Precleaner And Automatic Dust Ejector{1051,1055,1061,1062}
1982/03/08 Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08 New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1982/03/01 New Marine Gear Groups Have New Clutch Plates{3302}
1982/03/01 New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01 Brass Plug Used To Prevent Corrosion{3320}
1982/02/22 New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22 Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/03/15 New Oil Pump Outlet Elbow Is Stronger{3314,3310}
1982/03/22 Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22 Use Correct Torque On Hydraulic Valve Bolts, Nuts And Taperlock Studs{5050}
1982/03/22 Engine Replacement{1000}
1982/03/22 Improved Valve Cover Seal Used{1107}
1982/03/22 Use 5P5195 Fuel Line Wrench Correctly{0612,1252}
1982/03/22 Caterpillar Electric Starting Motors{1453,1407}
1982/03/22 Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22 Use FT1614 Cover To Protect Center Shaft Assembly{0622,3305,3306,3302,3307}
1982/03/22 Improved Plunger And New Spring Used In Mechanical Shutoff Group{7418}
1982/03/29 Parts Book Changes{0374}
1982/03/29 Location Of Sending Unit Changed To Improve Accuracy Of Water Temperature Indication{7453}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.