1980/08/11 Caterpillar


Improved Piston Ring Used At Turbine End Of Turbocharger{1052,1053,1077}

Usage:


All Vehicle Engines Equipped With Model 3LM Schwitzer Turbochargers

Description of Change: The piston ring, used at the turbine end of model 3LM Schwitzer Turbochargers, is now made of chromium alloy. The former piston ring used at this location was made from cast iron. The material in the new piston ring has more resistance to heat and wear than the material in the former piston ring.

Adaptable As: The new 1N3806 Piston Ring is a direct replacement for the former 4N9852 Piston Ring which is canceled. All parts service cartridge groups and cartridge repair kits will have the improved piston ring.

Caterpillar Information System:

1980/08/11 New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification{1306}
1980/08/11 6V2196 Microscope Available For Inspection Purposes{0653}
1980/08/11 6V3030 Digital Multimeter, 6V3031 Case And 6V3032 Test Lead Kit Are Now Available For Troubleshooting Electrical Circuits And Components{0651}
1980/08/04 Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04 The Service Publications Information Feedback System{0374}
1980/08/04 New Bend Specification For Used Or Field Reground Crankshafts{1202}
1980/07/14 Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides{1203}
1980/07/14 Two New Front Power Take-Off Groups Are Available{3055}
1980/07/14 Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/06/30 New Planetary Group Has Gears Which Operate With Lower Noise Levels{3301,3304}
1980/06/30 Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/06/23 Follow Correct Procedures For Installation Of Fuel Filters And Priming The Fuel Systems{1261,1258}
1980/08/11 New Single Key Lock System Uses The Same Standard Key For All Locks{7300,7550}
1980/08/11 Improved Power Takeoff Service Kits{3055}
1980/08/11 Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11 Higher Capacity Auxiliary Pump Group Is Now Available{1371}
1980/08/18 Alcohol Fuels Are Not Recommended For Use In Caterpillar Diesel Engines At The Present Time{1280,0374}
1980/08/18 Some Valve Lifter Assemblies Have A Black Color On The Finished Surface{1209}
1980/08/25 Service Meter Correction Decal Available{7478,7480}
1980/08/25 Vibration Isolators Used With Vacuum Switches For Air Filter Service Indicators{7452,1051,1054}
1980/08/25 Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings{1264,1278}
1980/09/01 Four Fabricated Tools Available For Use During Disassembly And Assembly Of Piston-Type Hydraulic Motors{5058,0622}
1980/09/01 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines{0653,1202,1203,1219,1230}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.