Window Wiper and Wiper Motor (Rear) - Remove and Install
Start By:
- Connect the steering frame lock.
- Remove screws (1) and the washers.
Show/hide table
Illustration 2 g03731483 - Loosen screws (2).
Show/hide table
Illustration 3 g03731486 - Remove screws (3) and the washers. Remove cover assembly (4).
Show/hide table
Illustration 4 g03731492 - Cut cable strap (5). Disconnect harness assembly (6).
Show/hide table
Illustration 5 g03731500 - Disconnect hose (8). Open cover (7).
Show/hide table
Illustration 6 g03731506 - Remove nut (10) and the washer. Remove wiper arm assembly (9).
Show/hide table
Illustration 7 g03731510 Show/hide tableIllustration 8 g03731517 - Remove wiper cap (12).
- Remove nut (11).
- Support rear wiper motor assembly (14) and remove nut (13).
- Remove rear wiper motor assembly (14).
Show/hide table
Illustration 1 | g03731467 |
- Install rear wiper motor assembly (14) in the reverse order of removal.
- Tighten nut (13) to a torque of
9 ± 1 N·m (80 ± 9 lb in) . - Tighten nut (11) to a torque of
7.5 ± 0.5 N·m (66.38 ± 4.43 lb in) . - Tighten nut (10) to a torque of
21 ± 1 N·m (186 ± 9 lb in) . Wait 0.5 hour and retorque nut (10) to a torque of21 ± 1 N·m (186 ± 9 lb in) . - Tighten screws (1), (2), and (3) to a torque of
6 ± 1 N·m (53 ± 9 lb in) .
- Tighten nut (13) to a torque of
Caterpillar Information System:
773GC Off-Highway Truck Machine System Position Sensor (Foot Brake Control)
E-series Hammer Improvements {6333} E-series Hammer Improvements {6333}
323F Excavator Machine Systems Calibration Error Codes
Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101} Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
Location of The 456-4554 Plate and Spacer Installation Gp {6547} Location of The 456-4554 Plate and Spacer Installation Gp {6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Remove and Install
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Assemble
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
2014/10/15 A New 451-6380 Thumb Arrangement is Now Available for Certain Mini Hydraulic Excavators {6547}
Installation Procedure for the 462-1657 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 5133, 7301, 7405, 7557} Installation Procedure for the 462-1657 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 5133, 7301, 7405, 7557}
2014/10/08 New Dual Lock Tilt Coupler Operating Instructions are Available for Certain Mini Hydraulic Excavators {5063, 5705, 6107, 6129}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
725 C2 Articulated Truck LRC Engine Supplement Gear Motor (Hydraulic Fan) - Assemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Control Valve (Ejector) - Disassemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Control Valve (Ejector) - Remove and Install
725 C2 Articulated Truck LRC Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
Installation of the 353-0768 Pilot Lines Gp on Certain Hydraulic Excavators{5057} Installation of the 353-0768 Pilot Lines Gp on Certain Hydraulic Excavators{5057}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Armrest
320D2 GC Excavator Machine System Specifications Flood Lighting
320 GC, 320 and 323 Excavator Machine Systems Specifications Track Roller (Single Flange)