Position Sensor (Foot Brake Control)
Show/hide table
| |
| Illustration 1 | g03567177 |
Show/hide table
| Specification for 266-1466 Position Sensor Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | At installation of position sensor, apply blue Loctite 242 to the threads of the screws. Tighten the mounting screws to the following torque |
| 2 | - | - | Required torque for turning the rotor is |
| - | - | - | Regulated operating voltage from ECM is 8 VDC |
| - | - | - | Output type is PWM. |
| - | - | - | Supply voltage is 8 VDC. |
| - | - | - | Operating temperature is |
| - | - | - | Output frequency is 500 Hz |
| - | - | - | Duty cycle is 3.5 to 94.0 % |
Caterpillar Information System:
E-series Hammer Improvements {6333} E-series Hammer Improvements {6333}
323F Excavator Machine Systems Calibration Error Codes
Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101} Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
Location of The 456-4554 Plate and Spacer Installation Gp {6547} Location of The 456-4554 Plate and Spacer Installation Gp {6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Remove and Install
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Assemble
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Disassemble
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
2014/10/15 A New 451-6380 Thumb Arrangement is Now Available for Certain Mini Hydraulic Excavators {6547}
Installation Procedure for the 462-1657 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 5133, 7301, 7405, 7557} Installation Procedure for the 462-1657 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 5133, 7301, 7405, 7557}
2014/10/08 New Dual Lock Tilt Coupler Operating Instructions are Available for Certain Mini Hydraulic Excavators {5063, 5705, 6107, 6129}
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Hydraulic System Oil Sample - Obtain
725 C2 Articulated Truck LRC Engine Supplement Gear Motor (Hydraulic Fan) - Assemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Control Valve (Ejector) - Disassemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Control Valve (Ejector) - Remove and Install
725 C2 Articulated Truck LRC Engine Supplement Gear Motor (Hydraulic Fan) - Disassemble
Installation of the 353-0768 Pilot Lines Gp on Certain Hydraulic Excavators{5057} Installation of the 353-0768 Pilot Lines Gp on Certain Hydraulic Excavators{5057}
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications Armrest
320D2 GC Excavator Machine System Specifications Flood Lighting