Window Wiper and Wiper Motor (Front) - Remove and Install
Start By:
- Connect the steering frame lock.
- Remove screws (1) and the washers.
Show/hide table
Illustration 2 g03731181 Show/hide table
Illustration 3 g03731195 - Remove screws (2) and the washers.
- Carefully remove panel assembly (3) far enough in order to disconnect harness assembly (4).
- Remove panel assembly (3).
Show/hide table
Illustration 4 g03731204 - Remove screw (5) and the washer.
Show/hide table
Illustration 5 g03731209 - Remove screws (7) and the washers. Remove cover assembly (6)
Show/hide table
Illustration 6 g03731231 - Cut cable strap (8). Disconnect harness assembly (9).
Show/hide table
Illustration 7 g03731242 - Disconnect hose (12).
- Remove bolts (11), the washers, and the nuts. Remove wiper arm assemblies (10).
Show/hide table
Illustration 8 g03731287 - Remove caps (13).
Show/hide table
Illustration 9 g03731308 Show/hide table
Illustration 10 g03731314 - Support wiper motor assembly (15) and remove nuts (14).
- Remove wiper motor assembly (15).
Show/hide table
| |
| Illustration 1 | g03731180 |
- Install wiper motor assembly (15) in the reverse order of removal.
- Tighten nuts (14) to a torque of
38 ± 2 N·m (28 ± 1 lb ft) . - Tighten bolts (11) to a torque of
14 ± 2 N·m (124 ± 180 lb in) .
- Tighten nuts (14) to a torque of
Caterpillar Information System:
Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4552 Plate and Spacer Installation Gp {6513, 6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Disassemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Remove and Install
Location of The 456-4551 Plate and Spacer Installation Gp {6547} Location of The 456-4551 Plate and Spacer Installation Gp {6547}
M318F, M320F and M322F Wheeled Excavators Hydraulic System Main Control Valve (Unloading Valve) - Check
349F XE and 352F XE Excavators Additional Messages
349F XE and 352F XE Excavators Declaration of Conformity
Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4550 Plate and Spacer Installation Gp {6513, 6547}
349F XE and 352F XE Excavators Boom/Stick/Bucket Combinations
349F XE and 352F XE Excavators Specifications
352F Excavator Plate Locations and Film Locations
Installation Procedure for 456-2993 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408} Installation Procedure for 456-2993 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators{1408}
Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547} Location of The 456-4553 Plate and Spacer Installation Gp {6513, 6547}
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Brake, Ejector and Fan) - Assemble
725C2, 730C2 Ejector Articulated Trucks - Machine Systems Piston Pump (Ejector and Steering) - Remove and Install
Location of The 456-4554 Plate and Spacer Installation Gp {6547} Location of The 456-4554 Plate and Spacer Installation Gp {6547}
C4.4 Engines for Caterpillar Built Machines Nitrogen Oxide Sensor - Remove and Install - Nitrogen Oxide Sensor Positioned in Original Equipment Manufacture (OEM) Exhaust Tube Assembly
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261} 20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101} Assembly Procedure for the 442-4004 Bucket Gp and the 442-4005 Bucket Gp {6101}
323F Excavator Machine Systems Calibration Error Codes
E-series Hammer Improvements {6333} E-series Hammer Improvements {6333}
773GC Off-Highway Truck Machine System Position Sensor (Foot Brake Control)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
2014/10/15 A New 451-6380 Thumb Arrangement is Now Available for Certain Mini Hydraulic Excavators {6547}