Oil Filter (Hydraulic, Return)
Show/hide table
Illustration 1 | g02592717 |
Show/hide table
Specification for 188-4145 Oil Filter Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 175-6174 Pipe | Apply Anaerobic thread sealant to the threads of the pipe.
Torque to |
2 | 1 | 6V-8932 Socket Setscrew | Apply Anaerobic thread sealant to the threads of the socket setscrew.
Torque to |
3 | 1 | 177-2623 Valve As | Torque to |
4 | - | - | Torque for the nut is |
5 | 1 | 175-6175 Pipe | Apply Anaerobic thread sealant to the threads of the pipe.
Torque to |
6 | 2 | 187-7171 Bolt | Apply Anaerobic thread sealant to the threads of the bolt.
Torque to |
7 | 4 | 8T-4189 Bolt | Apply Anaerobic thread sealant to the threads of the bolt.
Torque to |
8 | 2 | 8T-4970 Bolt | Apply Anaerobic thread sealant to the threads of the bolt.
Torque to |
9 | 4 | 8T-4184 Bolt | Torque to |
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 2 |
B | FT-3154 | Socket | 1 |
C | 6V-2055 | Vacuum Grease | - |
- Remove the bottom guard.
- Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for draining and filling procedures.
Show/hide table
Illustration 2 g02644606 - Remove clamp (2). Remove flange (1).
Show/hide table
Illustration 3 g02644608 - Disconnect harness assembly (3). Remove bolts (5). Remove flange (4).
Show/hide table
Illustration 4 g02644611 - Remove pipe (6). Remove O-ring seal (7).
Show/hide table
Illustration 5 g02644613 - Remove panel (8).
Show/hide table
Illustration 6 g02644616 Show/hide tableIllustration 7 g02644614 - Mark oil filter assembly (10) for installation. Remove bolts (9). Install Tooling (A) to oil filter assembly (10). Remove oil filter assembly (10).
Show/hide table
Illustration 8 g02644618 - Loosen bolts (11). Remove housing (12).
Show/hide table
Illustration 9 g02644837 Show/hide tableIllustration 10 g02644619 - Remove set screw (13). Use Tooling (B) (not shown) to remove valve assembly (12).
Show/hide table
Illustration 11 g02644620 - Remove O-ring seals (14).
- Apply Tooling (C) to O-ring seals (14). Install O-ring seals (14).
Show/hide table
Illustration 13 g02644619 Show/hide tableIllustration 14 g02644837 - Use Tooling (B) (not shown) to install valve assembly (12) into housing. Tighten valve assembly (12) to a torque of
5 ± 2 N·m (44 ± 10 lb in) . Install set screw (13).Show/hide tableIllustration 15 g02644839 - Slide valve assembly (12) on the filter housing. Orientate the face of housing level with the filter housing Location (X).
Show/hide table
Illustration 16 g02644618 - Install bolts (11). Tighten bolts (11) to a torque of
5 ± 2 N·m (44 ± 10 lb in) .Show/hide tableIllustration 17 g02644614 Show/hide tableIllustration 18 g02646264 Show/hide tableIllustration 19 g02644616 - Apply Tooling (C) to O-ring seals (15) and install O-ring seals (15). Install Tooling (A) to oil filter assembly (10). Install filter housing into the tank. Align with previous orientation. Install bolts (9). Tighten bolts (9) to a torque of
50 ± 10 N·m (37 ± 7 lb ft) .Show/hide tableIllustration 20 g02644611 - Apply Tooling (C) to O-ring seal (7) and pipe (6). Install O-ring seal (7). Install pipe (6).
Show/hide table
Illustration 21 g02647229 Show/hide tableIllustration 22 g02644608 - Apply Tooling (C) to O-ring seal (16). Install O-ring seal (16). Install flange (4). Tighten bolts (5) to a torque of
50 ± 10 N·m (37 ± 7 lb ft) . Connect harness assembly (3).Show/hide tableIllustration 23 g02644606 - Install flange (1). Install clamp (2).
- Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for draining and filling procedures.
Show/hide table
Illustration 12 | g02644620 |
Caterpillar Information System:
301.4C Mini Hydraulic Excavator Quick Coupler Operation - Manual Pin Grabber Quick Coupler (If Equipped)
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Hammer - Remove
Installation of the 275-1399 Front Lines Gp on Certain 320D Hydraulic Excavators{5057} Installation of the 275-1399 Front Lines Gp on Certain 320D Hydraulic Excavators{5057}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Assemble
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Disassemble
2011/10/19 An Improved Hood Latch Is Now Used Used for Certain D Series Excavators {7251}
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Install
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Hydraulic Accumulator - Remove
H110ES, H115ES, H120ES, H130ES, H140ES, H160ES and H180ES Hydraulic Hammers Buffer - Remove and Install
2011/09/01 Procedures for Increasing Component Life of Wheeled Excavator Fuel Systems are Available {1250}
Procedures for Increasing Component Life of Wheeled Excavator Fuel Systems{1250} Procedures for Increasing Component Life of Wheeled Excavator Fuel Systems{1250}
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Cylinder Cycle Time - Check
VHS-60/4 and VHS-70/4 Demolition and Scrap Shears Hydraulic Rotator Cycle Time - Check
345B Series II Excavator Machine System Specifications Bucket Cylinder
301.4C Mini Hydraulic Excavator Swing Gear Grease - Check
301.4C Mini Hydraulic Excavator Hydraulic System Oil Filter (Pilot) - Check/Replace
301.4C Mini Hydraulic Excavator Fuel Injection Nozzles - Check/Adjust
301.4C Mini Hydraulic Excavator Hydraulic System Breather - Replace
301.4C Mini Hydraulic Excavator Travel Motor
330D and 336D Excavators Machine System Specifications Return and Oil Filter Lines
330D and 336D Excavators Machine System Specifications Stick Cylinder
G3512 Gas Engine Flywheel
329E MHPU Mobile Hydraulic Power Unit Maintenance Interval Schedule