Bucket - Remove
Show/hide table
| 注意 |
|---|
|
若要在拆卸铲斗销时不会对销、轴承和/或 O 形密封圈造成损坏，将铲斗置于地面上，斗杆垂直放置，如图所示。 |
- 将铲斗、斗杆和铲斗控制连杆安置在地面上。
Show/hide table
图 1 g00534630 注: 通过上下移动斗杆释放铲斗销上的压力。
Show/hide table
图 2 g00880305 - 拆下螺母和防松螺栓 (5) ，拆下铲斗销 (4)。
- 将连杆组件 (1) 拉离铲斗。 拆下两个 O 形密封圈 (3)。
- 拆下螺母和防松螺栓 (2)。
Show/hide table
图 3 g01517271 - 拆下螺母 (6) 和防松螺栓 (7)。
- 拆下销 (8) 和 O 形密封圈。 将斗杆从铲斗 (9) 上分离。
注: 铲斗 (9) 的重量约为
240 kg (530 lb) 。
Caterpillar Information System:
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7 Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7
Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348} Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
330D Forest Machine Machine System Specifications Boom Lines - Log Loader (Butt-N-Top)
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Stick Lowering Control Valve
330D Forest Machine Machine System Specifications Boom Lines - Log Loader
C13, C15, and C18 Tier 4 Final Engines Engine Oil Filter Base
330D Forest Machine Machine System Specifications Boom Lines - Log Loader
C13, C15, and C18 Tier 4 Final Engines Turbocharger
H140D S, H160D S and H180D S Hydraulic Hammers General Information
Air Conditioning and Heating R134a for All Caterpillar Machines Cab Pressurization and Filtration System
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Install
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Boom Lowering Control Valve
345D, 349D and 349D2 Excavators Tool Control System System 16: One-Way/Two Pump
314D Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
2008/06/23 New Teeth Are Available for Mulchers {670C}
M316D, M318D and M322D Wheeled Excavators Power Train Axle - Remove - Front
M316D, M318D and M322D Wheeled Excavators Power Train Axle - Install - Front
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
M316D, M318D and M322D Wheeled Excavators Power Train Differential - Disassemble - Front Axle
M316D, M318D and M322D Wheeled Excavators Power Train Differential - Assemble - Front Axle
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan