C13, C15, and C18 Tier 4 Final Engines Caterpillar


Engine Oil Filter Base

Usage:

826K 232


图 1g01973513


图 2g02648518

表 1
227-5372 发动机机油滤清器总成的技术规格 
项目  数量  零件  技术规格说明 
4N-8150 弹簧  在试验力下的长度为 55.24 mm (2.175 in)
试验力为 75.619 ± 5.800 N (17.000 ± 1.304 lb)
试验后的自由长度为 93.726 mm (3.6900 in)。 
319-6220 弯头组件  如图所示定位弯头。
拧紧至扭矩为 70 ± 10 N·m (52 ± 7 lb ft)。 
6V-3908 O 形密封圈  用甘油或经认可的等效物润滑孔。 
102-5828 盖  拧紧至扭矩为 70 ± 10 N·m (52 ± 7 lb ft)。 
2P-4304 空心螺柱  在空心螺柱的锥形端涂覆一段长度为 7.6 mm (0.30 in) 的红色 Loctite 271。
拧紧至扭矩为 85 ± 14 N·m (63 ± 10 lb ft)。 
2P-4304 空心螺柱  在空心螺柱的锥形端 10 mm (0.4 in) 的长度 (D) 上涂覆红色 Loctite 271。
拧紧至扭矩为 68 ± 7 N·m (50 ± 5 lb ft)。 

Caterpillar Information System:

330D Forest Machine Machine System Specifications Boom Lines - Log Loader
C13, C15, and C18 Tier 4 Final Engines Turbocharger
H140D S, H160D S and H180D S Hydraulic Hammers General Information
Air Conditioning and Heating R134a for All Caterpillar Machines Cab Pressurization and Filtration System
Air Conditioning and Heating R134a for All Caterpillar Machines Condensate Drainage System
AccuGrade® GPS (CD700) Display Settings
330D, 336D and 340D Excavators Hydraulic System Control Valve (Boom Lowering)
AccuGrade® GPS (CD700) Angle Sensor - Calibrate - PSC System
Automatic Lubrication System for Large Hydraulic Hammers Automatic Lubrication System Troubleshooting
Air Conditioning and Heating R134a for All Caterpillar Machines Machine Preparation for Troubleshooting
345C UHD Excavator and 345C Mobile Hydraulic Power Unit Window Wiper and Washer Control
314D Excavator Hydraulic System Relief Valve (Main) - Test and Adjust
330D Forest Machine Machine System Specifications Boom Lines - Log Loader
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Stick Lowering Control Valve
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
330D Forest Machine Machine System Specifications Boom Lines - Log Loader (Butt-N-Top)
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348} Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348}
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7 Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Remove
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Install
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Boom Lowering Control Valve
345D, 349D and 349D2 Excavators Tool Control System System 16: One-Way/Two Pump
314D Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.