Axle - Remove - Front
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 6V-3160 | 双作用油缸 | 1 |
| 3S-6224 | 电动液压泵总成 | 1 | |
| 162-4197 | 连杆 M24 - 3.0 × 4 ft |
1 | |
| 9U-5345 | 螺母 M24 - 3.0 |
1 | |
| 1U-9895 | 十字挡块 | 1 | |
| B | 4C-9634 | 拉拔器螺柱 | 1 |
| 4K-0684 | 硬垫圈 | 1 | |
| 9U-6832 | 螺母 | 1 | |
| 1P-1840 | 轴承拆卸工具适配器 | 1 | |
| 6V-3175 | 双作用油缸 | 1 | |
| 3S-6224 | 电动液压泵总成 | 1 | |
开始:
- 拆下前轮胎和轮缘。 请参阅拆解和组装, "轮胎和轮辋 - 拆卸和安装"。
- 拆卸前驱动轴。 请参考拆解和组装, "驱动轴 - 拆卸和安装"。
- 释放液压系统压力。 请参阅拆解和组装, "液压系统压力 - 释放"。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 断开软管组件 (1) 。 对另一侧重复此操作。
Show/hide table
 | |
| 图 1 | g01184308 |
- 断开软管组件 (3) 。 对另一侧重复此操作。
Show/hide table
 | |
| 图 2 | g01184307 |
- 将适当的起吊设备连接到前桥组件 (2) 的两侧上。 前桥组件 (2) 的重量约为 794 kg (1750 lb)。
- 断开润滑脂软管组件 ( 6) 。 拆下接头 (7) 。
Show/hide table
 | |
| 图 3 | g01184309 |
Show/hide table
 | |
| 图 4 | g01184310 |
- 拆下螺栓 (4) 。 使用工具 (A) 以拆下销组件 (5) 。
- 使用适当的起吊设备来拆下前桥组件。
- 使用工具 (B) 将衬套 (8) 从前桥组件 (2) 上拆下。
Show/hide table
 | |
| 图 5 | g01200121 |
Caterpillar Information System:
2008/06/23 New Teeth Are Available for Mulchers {670C}
314D Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
345D, 349D and 349D2 Excavators Tool Control System System 16: One-Way/Two Pump
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Boom Lowering Control Valve
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Install
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Remove
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7 Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7
Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348} Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
330D Forest Machine Machine System Specifications Boom Lines - Log Loader (Butt-N-Top)
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Stick Lowering Control Valve
M316D, M318D and M322D Wheeled Excavators Power Train Axle - Install - Front
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
M316D, M318D and M322D Wheeled Excavators Power Train Differential - Disassemble - Front Axle
M316D, M318D and M322D Wheeled Excavators Power Train Differential - Assemble - Front Axle
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Flywheel
330D Forest Machine Machine System Specifications Boom - Log Loader (Butt-N-Top)
307E2 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove
307E2 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Install
2008/09/01 A New Plate Assembly Improves the Reliability of the Fuel Filter Mounting Group on Certain Mini Hydraulic Excavators {1261, 1274}
307D Excavator Machine Systems Bucket Cylinder - Remove