Differential - Disassemble - Front Axle
拆解步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 8T-0980     | 轴承拔出器     | 1     |
8T-0504 | 轴承拉拔器     | 1     | |
1P-0510 | 冲头总成     | 1     | |
B     | 8T-0984     | 固定器     | 1     |
C     | 1U-7600     | 滑锤拉拔器总成     | 1     |
D     | 8T-0979     | 拉拔器总成     | 1     |
1U-5816 | 套筒     | 1     | |
E     | 1U-7502     | 修理台架     | 1     |
开始:
- 拆下前车桥。 请参阅拆解和组装, "轮轴 - 拆卸"。
- 拆下终传动托架、轮毂和制动器。 请参考拆解和组装, "终传动托架、轮毂和制动器 - 拆卸"。
- 拆下转向壳体和轴承。 请参考拆解和组装, "壳体和轴承(转向桥) - 拆卸"。
- 将适当的起吊设备连接到前桥组件上,然后将前桥组件放置到工具 (E) 上。 前桥组件的重量约为 213 kg (470 lb)。
Show/hide table
图 1 | g01517039 |
- 拆下螺栓 (2 ) 。
- 将适当的起吊设备连接在桥壳 (1) 上,然后拆下桥壳 (1) 。 桥壳 (1) 的重量约为 68 kg (150 lb)。
- 将差速器 (3) 从桥壳 (4) 上拆下。
Show/hide table
图 2 | g01135682 |
- 安装工具 (A) ,以拆下轴承内圈 (5) (图中未显示)。
Show/hide table
图 3 | g01008032 |
- 安装工具 (A) ,以拆下轴承内圈 (6) (图中未显示)。
Show/hide table
图 4 | g01008033 |
- 将螺栓 (7) 从差速器 (3) 上拆下。
Show/hide table
图 5 | g01008034 |
- 在外壳 (8) 和差速器 (3) 上作上对准标记,以备组装之用。 将外壳 (8) 从差速器 (3) 上拆下。
Show/hide table
图 6 | g01008036 |
- 拆下止推垫圈 (9) 和侧齿轮 (10) 。
Show/hide table
图 7 | g01008037 |
- 拆下十字轴组件 (11) 、止推垫圈 (12) 和星形齿轮 (13) 。
Show/hide table
图 8 | g01008035 |
- 拆下侧齿轮 (14) 和止推垫圈 (15) (图中未显示)。
Show/hide table
图 9 | g01008038 |
- 使用适当的压具将差速器壳 (16) 从齿圈 (17) 上拆下。
Show/hide table
图 10 | g01008039 |
- 将弹簧销 (16A) 从差速器壳 (16) 上拆下。
Show/hide table
图 11 | g01190401 |
- 将工具 (B) 安装到法兰 (19) 上。 拆下螺母 (18) 。
Show/hide table
图 12 | g01135689 |
- 拆下垫圈 (20) 和法兰 (19) 。
Show/hide table
图 13 | g01138045 |
- 使用工具 (C) 拆下轴密封圈 (21) 。
Show/hide table
图 14 | g01135702 |
- 拆下小齿轮组件 (22) 。
Show/hide table
图 15 | g01008565 |
- 拆下轴承内圈 (23) 。
Show/hide table
图 16 | g01135703 |
- 拆下隔环 (24) 。
Show/hide table
图 17 | g01008567 |
Show/hide table
图 18 | g01008568 |
- 安装工具 (D) ,以拆下轴承内圈 (25) 。
- 将轴承外圈 (26) 和轴承外圈 (27) 从桥壳 (4) 上拆下。
Show/hide table
图 19 | g01135705 |
- 将轴承外圈 (28) 和垫片 (28A) (图中未显示)从桥壳 (4) 上拆下。
Show/hide table
图 20 | g01191940 |
- 将轴承外圈 (29) 和 O 形密封圈 (30) 从桥壳上拆下。
Show/hide table
图 21 | g01135719 |
Caterpillar Information System:
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
M316D, M318D and M322D Wheeled Excavators Power Train Axle - Install - Front
M316D, M318D and M322D Wheeled Excavators Power Train Axle - Remove - Front
2008/06/23 New Teeth Are Available for Mulchers {670C}
314D Excavator Hydraulic System Relief Valve (Blade) - Test and Adjust - If Equipped
345D, 349D and 349D2 Excavators Tool Control System System 16: One-Way/Two Pump
314D Excavator Hydraulic System Relief Valve (Line) - Test and Adjust - Boom Lowering Control Valve
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Install
307E2 Mini Hydraulic Excavator Machine Systems Bucket - Remove
Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7 Supplemental Custom Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 291-9540 Hydraulic Generator Arrangement ) and the Operation Instructions{1404, 1408, 4450, 5057, 5070, 5117, 5137, 7490, 7610, 7
Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348} Excessive Engine Oil Consumption Issues on 345C and 345D Excavators{1225, 1348}
345D, 349D and 349D2 Excavators Hydraulic System Cylinder Drift - Check - Loaded Bucket
M316D, M318D and M322D Wheeled Excavators Power Train Differential - Assemble - Front Axle
Automatic Lubrication System for Large Hydraulic Hammers Lubrication Pump
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C13, C15, and C18 Tier 4 Final Engines Flywheel
330D Forest Machine Machine System Specifications Boom - Log Loader (Butt-N-Top)
307E2 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Remove
307E2 Mini Hydraulic Excavator Machine Systems Bucket Linkage - Install
2008/09/01 A New Plate Assembly Improves the Reliability of the Fuel Filter Mounting Group on Certain Mini Hydraulic Excavators {1261, 1274}
307D Excavator Machine Systems Bucket Cylinder - Remove
307D Excavator Machine Systems Stick Cylinder - Remove and Install
Serviceable Components Are Identified for an Alternative Stick Cylinder on Certain Excavators{5458} Serviceable Components Are Identified for an Alternative Stick Cylinder on Certain Excavators{5458}
2008/09/08 New Software For The AccuGrade® Electric Mast Is Now available {7620, 79NS}